IEC 60947-8-2021 PDF

IEC 60947-8-2021 PDF

Low-voltage switchgear and controlgear-Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

$186.00 $371.99 -50%
Product Code: IEC 60947-8
Stock In Stock
Edition: 2.0
Published: 07/2021
Number of Pages: 86
File Size: 1 file, 1 Byte

Available Options

Product Description

Low-voltage switchgear and controlgear – Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

Introduction: Thermal protection systems which are based on the principle of monitoring the temperature of the protected parts constitute a simple and effective means of protecting rotating electrical machines, called also electric motors, against excessive temperature rises, including those caused by faults in the cooling system, or excessively high ambient temperature, whereas systems of protection based only on monitoring the current absorbed do not ensure this type of protection in every circumstances. Since the operating temperature and response times of thermal protection systems are fixed in advance, they are not often adjusted in relation to the conditions of use of the machine and, hence, they are not completely effective for all fault conditions, or improper use of the machine. A thermal protection system in accordance with this document can consist of a characteristic change thermal detector which has an associated control unit to convert a point on the characteristic of the detector to a switching function. A very large number of thermal protection systems are in use and, in all cases, the machine manufacturer will fit the detectors in the machine. The machine manufacturer will either supply the control unit with the machine or specify particulars of the control unit to be used. It is also customary for the control units to be considered as part of the control system and not necessarily supplied with the machine. For this reason, it is considered useful to have an interchangeab

Scope: This part of IEC 60947 series specifies requirements for control units, which control a switching device in response to the PTC thermistors incorporated in rotating electrical machines and the industrial application. It specifies requirements for that type of system comprising a positive temperature coefficient (PTC) thermistor having particular characteristics, and its associated control unit. This document includes: the characteristics, construction, performance and tests of the control unit; and its association with a PTC thermistor designated “Mark A”. This document does not cover: the incorporation of thermal protections into rotating machines and their maximum winding temperature. See IEC 60034-11; use of the product within explosive atmospheres (see IEC 60079 (all parts)); software and firmware requirements; NOTE 1 Guidance on embedded software is given in IEC TR 63201. cyber security aspects (see IEC TS 63208). NOTE 2 It is not possible to specify all the requirements for the operating characteristics of a control unit, as they are dependent on some aspects of the PTC thermistors. Some aspects of the requirements of the thermal protector system can only be specified when account is taken of the characteristics of the rotating machine to be protected and the method of installation of the PTC thermistor within the machine.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60947-8-2021 PDF

IEC 60947-8-2021 PDF

$186.00 $371.99