IEC 60952-1-2013 PDF

IEC 60952-1-2013 PDF

Aircraft batteries-Part 1: General test requirements and performance levels

$163.93 $327.86 -50%
Product Code: IEC 60952-1
Stock In Stock
Edition: 3.0
Published: 07/2013
Number of Pages: 84
File Size: 1 file, 489 Bytes

Available Options

Product Description

Aircraft batteries – Part 1: General test requirements and performance levels

Introduction: The IEC 60952 series defines minimum environmental and performance requirements for establishing a qualification standard for airworthiness of lead-acid and nickel-cadmium aircraft batteries, which contain corrosive electrolytes. The series defines test procedures for determining battery performance. The electrical test results may be used to establish airworthiness in a particular application. For all tests, the manufacturer declares the minimum performance for each battery type. The requirements of IEC 60952 for aircraft batteries are divided into three parts: Part 1 defines test procedures for the evaluation, comparison and qualification of batteries and states minimum environmental performance levels for airworthiness. Part 2 defines the design requirements for aircraft batteries as well as their format (shape and size) and the range of aircraft interface connectors that are used. Part 3 defines the product specification which is used to define specific requirements for an application and a declaration of design and performance (DDP), which details the performance of a battery format when tested to Part 1.

Scope: This part of the IEC 60952 series defines test procedures for the evaluation, comparison and qualification of batteries and states minimum performance and environmental levels for airworthiness. Where specific tests are defined with no pass/fail requirement (to establish performance capability), the manufacturer’s declared values, from qualification testing, will be used to establish minimum requirements for ongoing maintenance of approval for that design of battery. To provide representative examples, this standard utilises voltage and current values based upon an aircraft electrical system nominally rated at 28 V d.c. Additionally, the nominal values for cell voltage are assumed to be 1,2 V per cell for nickel-cadmium batteries and 2,0 V per cell for lead-acid batteries. The specific topics addressed in this part of IEC 60952 serve to establish acceptable quality standards required to qualify a battery as airworthy. In cases where the requirements for a specific application exceed those detailed in this standard, the purchaser will detail said requirements in the product specification and the method of establishing compliance. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 5.10 Duty cycle performance
  • 5.11 Water consumption test

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60952-1-2013 PDF

IEC 60952-1-2013 PDF

$163.93 $327.86