IEC 61000-4-21-2011 PDF

IEC 61000-4-21-2011 PDF

Electromagnetic compatibility (EMC)-Part 4-21: Testing and measurement techniques-Reverberation chamber test methods

$255.36 $510.71 -50%
Product Code: IEC 61000-4-21
Stock In Stock
Edition: 2.0
Published: 01/2011
Number of Pages: 228
File Size: 1 file, 3 Bytes

Available Options

Product Description

Electromagnetic compatibility (EMC) – Part 4-21: Testing and measurement techniques – Reverberation chamber test methods

Introduction: IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (in so far as they do not fall under the responsibility of the product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts, published either as international standards or as technical specifications or technical reports, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivision (example: IEC 61000-6-1).

Scope: This part of IEC 61000 considers tests of immunity and intentional or unintentional emissions for electric and/or electronic equipment and tests of screening effectiveness in reverberation chambers. It establishes the required test procedures for performing such tests. Only radiated phenomena are considered. The objective of this part is to establish a common reference for using reverberation chambers to evaluate the performance of electric and electronic equipment when subjected to radio-frequency electromagnetic fields and for determining the levels of radio-frequency radiation emitted from electric and electronic equipment. NOTE Test methods are defined in this part for measuring the effect of electromagnetic radiation on equipment and the electromagnetic emissions from equipment concerned. The simulation and measurement of electromagnetic radiation is not adequate for quantitative determination of effects. The defined test methods are organized with the aim to establish adequate reproducibility and repeatability of test results and qualitative analysis of effects. This part of IEC 61000 does not intend to specify the tests to be applied to a particular apparatus or system. Its main aim is to give a general basic reference to all concerned product committees of the IEC. The product committees should select emission limits and test methods in consultation with CISPR. The product committees remain responsible for the appropriate choice of the immunity tests and the immunity test limits to be applied to their equipment. Other methods, such as those covered in IEC 61000-4-3, CISPR 16-2-3 and CISPR 16-2-4 may be used.1

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Test results, test report and test conditions

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61000-4-21-2011 PDF

IEC 61000-4-21-2011 PDF

$255.36 $510.71