IEC 61029-2-1-1993 PDF

IEC 61029-2-1-1993 PDF

Safety of Transportable Motor-Operated Electric Tools - Part 2-1: Particular Requirements for Circular Saws

$63.05 $126.10 -50%
Product Code: IEC 61029-2-1
Stock In Stock
Edition: 1.0
Published: 03/1993
Number of Pages: 25
File Size: 0 files

Available Options

Product Description

Safety of Transportable Motor-Operated Electric Tools - Part 2-1: Particular Requirements for Circular Saws

Scope: This clause of pa rt 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transpo rtable circular saws intended for cutting wood and similar materials with a blade diameter not exceeding 260 mm as defined in 2.101. 2 Definitions This clause of part 1 is applicable except as follows: 2.21 Replacement: normal load: Load obtained when the tool is operated continuously with the blade in the ' ve rtical position, the load being such that the input, in watts, is equal to: 0,25 s 47)o for a.c. saws with asynchronous induction motors; - 0,20 s ,77o for other saws designed for cutting depths exceeding 55 mm; 0,13 s 4T-10 for other saws designed for cutting depths not exceeding 55 mm and for circular saw components of combination machines. where s is the maximum cutting depth in millimetres and no is the no-load speed of the blade, in revolutions per minute, after the tool has been operating for a period of 15 min with no load, at rated voltage or at the upper limit of the rated voltage range. 2.101 circular saw: Tool designed to cut wood or similar materials by means of a rotating toothed saw blade that projects through a slot in a table which supports and positions the workpiece which is fed by hand towards the saw blade. The motor and drive assembly for the saw blade are located below the level of the table. 3 General requirement This clause of part 1 is applicable.

Contents:

  • FOREWORD
  • 1 Scope
  • 2 Definitions
  • 3 General requirement
  • 4 General notes on tests
  • 5 Rating
  • 6 Classification
  • 7 Marking
  • 8 Protection against electric shock
  • 9 Starting
  • 10 Input and current
  • 11 Heating
  • 12 Leakage current
  • 13 Radio and television interference suppression
  • 14 Protection against ingress of foreign bodies and moisture resistance
  • 15 Insulation resistance and electric strength
  • 16 Endurance
  • 17 Abnormal operation
  • 18 Stability and mechanical hazards
  • 19 Mechanical strength
  • 20 Construction
  • 21 Internal wiring
  • 22 Components
  • 23 Supply connection and external flexible cables and cords
  • 24 Terminals for external conductors
  • 25 Provision for earthing
  • 26 Screws and connections
  • 27 Creepage distances, clearances and distances through insulation
  • 28 Resistance to heat, fire and tracking
  • 29 Resistance to rusting

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61029-2-1-1993 PDF

IEC 61029-2-1-1993 PDF

$63.05 $126.10