IEC 61029-2-10-1998 PDF

IEC 61029-2-10-1998 PDF

Safety of Transportable Motor-Operated Electric Tools - Part 2-10: Particular Requirements for Cutting-Off Grinders

$72.51 $145.02 -50%
Product Code: IEC 61029-2-10
Stock In Stock
Edition: 1.0
Published: 06/1998
Number of Pages: 24
File Size: 1 file, 111 Bytes

Available Options

Product Description

Safety of Transportable Motor-Operated Electric Tools - Part 2-10: Particular Requirements for Cutting-Off Grinders

Scope: This clause of part 1 is applicable, except as follows: 1.1 Addition: This standard applies to cutting-off grinders intended mainly for cutting metal with a plain abrasive cutting-off wheel whose diameter does not exceed 406 mm and has a rated peripheral speed not exceeding 80 m/s. Definitions This clause of part 1 is applicable, except as follows: 2.21 Replacement: normal load load obtained when the tool is operated continuously, with the torque applied to the spindle such that the input, in watts, is equal to the rated input NOTE – The normal load is based on the rated voltage or on the upper limit of the rated voltage range. Addition: 2.101 cutting-off grinders machine designed to cut metal by means of a plain abrasive cutting-off wheel which is fixed on the tool spindle. The tool spindle is mounted on the outer end of an arm which is pivoted at its inner end on the machine frame. The machine table has a clamping device to secure the workpiece. The table can be traversed towards the cutting-off wheel (see figure 101). 2.102 tool spindle spindle of the cutting-off grinder which supports and transmits the rotation of the plain abrasive cutting-off wheel 2.103 guard device which partially encloses the plain abrasive cutting-off wheel in order to protect the users against accidental contact with the wheel in normal use and against the ejection of fragments of the wheel in the protected area in the case of breakage of the wheel 2.104 flange assembly means provided to clamp the plain abrasive cutting-off wheel to the machine spindle

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61029-2-10-1998 PDF

IEC 61029-2-10-1998 PDF

$72.51 $145.02