IEC 61029-2-11-2001 PDF

IEC 61029-2-11-2001 PDF

Safety of Transportable Motor-Operated Electric Tools - Part 2-11: Particular Requirements for Mitre-Bench Saws

$72.51 $145.02 -50%
Product Code: IEC 61029-2-11
Stock In Stock
Edition: 1.0
Published: 07/2001
Number of Pages: 26
File Size: 1 file, 140 KB

Available Options

Product Description

Safety of Transportable Motor-Operated Electric Tools - Part 2-11: Particular Requirements for Mitre-Bench Saws

Scope: This clause of part 1 is applicable except as follows: 1.1 Replace the first paragraph by: This standard applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials with a blade diameter not exceeding 350 mm, as defined in 2.101. Definitions This clause of part 1 is applicable except as follows: 2.21 Replacement: normal load load obtained when the tool is operated continuously at a voltage equal to rated voltage or at the upper limit of the rated voltage range, the torque applied to the spindle being such that the input, in watts, is equal to the rated input Addition: 2.101 combined mitre-bench saw tool designed to cut non-ferrous metals such as aluminium, wood or similar materials by means of a rotating toothed blade. The combined saw is equipped with two tables: a lower table, which supports and positions the workpiece against a fence during the mitre action and an upper table provided with a slot through which the saw blade projects, supporting the workpiece which is fed by hand towards the saw blade The saw blade is fitted on an arm suspended over the table; such arm is generally pivoted to the saw support frame or directly to the saw table. In some cases, the chop action of the saw blade is followed by a sliding movement (see figures 108, 109, 110) 2.102 lower table table used to perform mitre operations 2.103 upper table table used to perform bench operations General requirement This clause of part 1 is applicable.

Contents:

  • FOREWORD
  • 1 Scope
  • 2 Definitions
  • 3 General requirement
  • 4 General notes on tests
  • 5 Rating
  • 6 Classification
  • 7 Marking
  • 8 Protection against electric shock
  • 9 Starting

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61029-2-11-2001 PDF

IEC 61029-2-11-2001 PDF

$72.51 $145.02