IEC 61083-3-2020 PDF

IEC 61083-3-2020 PDF

Instruments and software used for measurement in high-voltage and high-current tests-Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

$163.93 $327.86 -50%
Product Code: IEC 61083-3
Stock In Stock
Edition: 1.0
Published: 11/2020
Number of Pages: 70
File Size: 1 file, 2 Bytes

Available Options

Product Description

Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

Introduction: The electric power industry requires standardized tools to provide confidence in testing results, and to prove equivalence between tests performed in different laboratories and test fields. This part of IEC 61083 specifies requirements for the performance of digital recording instruments used for tests with alternating and direct voltages and currents. The intention of this document is to provide recommendations on the digital recording instruments to be used in tests with alternating and direct voltages and currents. Digital recording instruments are considered as black boxes (including hardware, firmware, and software). They are characterized for their intended application by physical calibration with the waveforms needed for that application. This document does not apply to simple analogue or digital meters that do not have recording capability.

Scope: This part of IEC 61083 is applicable to digital recording instruments used for measurements during tests with high alternating and direct voltages and currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in the relevant IEC standards (e.g. IEC 60060-1, IEC 60060-2, IEC 60060-3, IEC 62475, IEC 61180). This document is applicable to those digital recording instruments that will be designed and type tested according to this document. This document defines performance requirements for digital recording instruments used during tests with alternating voltages and currents (AC) or direct voltages and currents (DC); specifies the necessary requirements for such instruments to ensure their suitability for use under the relevant standards; establishes the tests and procedures necessary to demonstrate their compliance; defines the terms related to digital recording instruments with recording function and access to raw data. NOTE Examples of relevant alternating and direct voltages and currents to be measured are listed in Annex D. This International Standard has the status of a horizontal standard in accordance with IEC Guide 108.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61083-3-2020 PDF

IEC 61083-3-2020 PDF

$163.93 $327.86