IEC 61196-1-1-2007 PDF

IEC 61196-1-1-2007 PDF

Coaxial communication cables-Part 1-1: Capability approval for coaxial cables

$25.22 $50.44 -50%
Product Code: IEC 61196-1-1
Stock In Stock
Edition: 1.0
Published: 04/2007
Number of Pages: 24
File Size: 1 file, 211 Bytes

Available Options

Product Description

Coaxial communication cables – Part 1-1: Capability approval for coaxial cables

Introduction: Quality systems are intended to give confidence to the customers. It is presumed that a supplier whose full organization complies with ISO 9000 is able to assess the quality of his services (services can be a product). However, to assess the quality of the services is obviously not sufficient from a customer point of view. The customer's concern is the quality of the product. That means the compliance to a given specification. The IEC Quality Assessment System for Electronic Components (IECQ) product/process approval procedures Qualification Approval (QA), Capability Approval (CA) and Technology Approval (TA) are intended to ensure that all products delivered under one of them will comply to a given specification. These procedures are described in QC 001002-3. As a first step, to achieve this task, the three procedures just mentioned require as a prerequisite the manufacturer’s approval (described in Clause 2 of QC 001002-3 and which is basically an ISO 9000 approval with the relevant technical scope, plus IECQ requirements as defined in 2.3.2 of QC 001002-3). Manufacturer’s Approval ensures that all the actions taken for QA, CA or TA will be under control and well documented. The second step is the qualifying stage, which is sometimes called type Approval. In case of Qualification Approval (QA), the purpose of this stage is to demonstrate the validity of the design file of a given product. (Ideally, the design file should contain the process and the control files). In case o

Scope: This International standard applies to Capability Approval requirements for coaxial communi- cation cables as specified in generic specification IEC 61196-1. It specifies the requirements for a manufacturer seeking approval of his capability to design (if applicable), manufacture, inspect, test and release coaxial communication cables as defined in his capability manual. Manufacturer’s Approval, which embodies all the relevant requirements of ISO 9001, is a prerequisite for granting Capability Approval but a manufacturer may apply for Manufacturer’s Approval and Capability Approval concurrently. NOTE 1 This document was written in order to be used in case of third party certification; however, it may be used as the basis for second party or self certification. NOTE 2 When certification is required, CA should be used according to the following. CA may also be used for second party or self-assessment.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61196-1-1-2007 PDF

IEC 61196-1-1-2007 PDF

$25.22 $50.44