IEC 61241-11-2005 PDF

IEC 61241-11-2005 PDF

Electrical apparatus for use in the presence of combustible dust-Part 11: Protection by intrinsic safety 'iD'

$72.51 $145.02 -50%
Product Code: IEC 61241-11
Stock In Stock
Edition: 1.0
Published: 10/2005
Number of Pages: 42
File Size: 0 files

Available Options

Product Description

Electrical apparatus for use in the presence of combustible dust – Part 11: Protection by intrinsic safety 'iD'

Introduction: Many dusts which are generated, processed, handled and stored, are combustible. When ignited they can burn rapidly and with considerable explosive force if mixed with air in the appropriate proportions. It is often necessary to use electrical apparatus in locations where such combustible materials are present, and suitable precautions must therefore be taken to ensure that all such apparatus is adequately protected so as to reduce the likelihood of ignition of the external explosive atmosphere. In electrical apparatus, potential ignition sources include electrical arcs and sparks, hot surfaces and frictional sparks. Areas where dusts, flyings and fibres in air occur in dangerous quantities are classified as hazardous and are divided into three zones according to the level of risk. Generally, electrical safety is ensured by the implementation of one of two considerations, i.e. that electrical apparatus be located where reasonably practicable outside hazardous areas and that electrical apparatus be designed, installed and maintained in accordance with measures recommended for the area in which the apparatus is located. Combustible dust can be ignited by electrical apparatus in several main ways: by surfaces of the apparatus that are above the minimum ignition temperature of the dust concerned. The temperature at which a type of dust ignites is a function of the properties of the dust, whether the dust is in a cloud or layer, the thickness of the layer and the geometry of the he

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Type verifications, assessments and type tests
  • 10.1 Spark ignition assessment
  • 10.2 Temperature tests
  • 10.3 Voltage tests
  • 10.4 Small component ignition test
  • 10.5 Determination of parameters of loosely specified components
  • 10.6 Tests for cells and batteries
  • 10.7 Mechanical test
  • 10.8 Tests for apparatus containing piezoelectric devices
  • 10.9 Type tests for diode safety barriers and safety shunts
  • 10.10 Cable pull test
  • 11 Routine verifications and tests
  • 12 Marking
  • 12.1 General
  • 12.2 Marking of connection facilities
  • 13 Documentation

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61241-11-2005 PDF

IEC 61241-11-2005 PDF

$72.51 $145.02