IEC 61243-3-2014 PDF

IEC 61243-3-2014 PDF

Live working-Voltage detectors-Part 3: Two-pole low-voltage type

$239.59 $479.18 -50%
Product Code: IEC 61243-3
Stock In Stock
Edition: 3.0
Published: 10/2014
Number of Pages: 156
File Size: 0 files

Available Options

Product Description

Live working – Voltage detectors – Part 3: Two-pole low-voltage type

Introduction: The devices covered by this standard are designed to be used in a live working environment to determine the status (presence or absence of operating voltage) of low-voltage installations. The live working environment comes with its specific hazards and working conditions, which are generally more severe than the ones encountered by workers in other fields than live working. This International Standard is a product standard giving essential requirements and tests to verify that the devices perform well and will contribute to the safety of the users, provided they are used by skilled persons, and according to safe working procedures and to local or national regulations. Voltage detectors are not considered as measuring or testing devices, separately covered by IEC 61010 series. However, in case of misuse by general electrical workers, the requirements and tests included in this document are intended to achieve an equivalent level of safety. To take into consideration the specific needs of a live working environment, the following differences exist with IEC 61010 series: some requirements and tests exist in both standards but with different sanctions or pass test criteria (see A.1); some requirements of IEC 61010 are not included in this standard (see A.2, with rationale); some additional requirements of this standard are not specified in IEC 61010 with the rationale (see A.3). This International Standard has been prepared according to the requirements of IEC 61477, where applic

Scope: This part of IEC 61243 is applicable to hand-held two-pole voltage detectors with their accessories (crocodile clips and detachable leads) to be used in contact with parts of electrical systems: for a.c. voltages not exceeding 1 000 V at nominal frequencies between Hz and up to 500 Hz, and/or for d.c. voltages not exceeding 1 500 V. NOTE The a.c. voltages defined in this standard refer either to phase-to-phase voltages or phase to neutral voltages. Contact electrode extensions are not covered by this standard. Voltage detectors covered by this standard are intended to be used under dry and humid conditions, both indoor and outdoor. They are not intended to be used under rain conditions. Voltage detectors covered by this standard are not intended to be used for continuous operation. Voltage detectors covered by this standard are intended to be used up to 2 000 m above sea level. This standard also includes provisions for the following supplementary functions when available (see Annex B): phase indication, rotating field indication, and continuity check. Other supplementary functions are not covered by this standard. Voltage detectors covered by this standard are not considered as measuring devices. Relevant safety requirements for measuring devices are included in IEC 61010 series.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61243-3-2014 PDF

IEC 61243-3-2014 PDF

$239.59 $479.18