IEC 61260-3-2016 PDF

IEC 61260-3-2016 PDF

Electroacoustics-Octave-band and fractional-octave-band filters-Part 3: Periodic tests

$100.88 $201.76 -50%
Product Code: IEC 61260-3
Stock In Stock
Edition: 1.0
Published: 03/2016
Number of Pages: 50
File Size: 1 file, 590 Bytes

Available Options

Product Description

Electroacoustics – Octave-band and fractional-octave-band filters – Part 3: Periodic tests

Introduction: IEC 61260:1995 and IEC 61260:1995/AMD 1:2001 are now separated into the following three parts of IEC 61260 series: Part 1: Specifications Part 2: Pattern evaluation tests Part 3: Periodic tests For assessments of conformance to performance specifications, IEC 61260-1 uses different criteria than were used for the IEC 61260:1995 edition. IEC 61260:1995 did not provide any requirements or recommendations to account for the uncertainty of measurement in assessments of conformance to specifications. This absence of requirements or recommendations to account for uncertainty of measurement created ambiguity in determinations of conformance to specifications for situations where a measured deviation from a design goal was close to the limit of the allowed deviation. If conformance was determined based on whether a measured deviation did or did not exceed the limits, the end-user of the octave-band and fractional-octave-band filters incurred the risk that the true deviation from a design goal exceeded the limits. To remove this ambiguity, IEC Technical Committee 29, at its meeting in 1996, adopted a policy to account for measurement uncertainty in assessments of conformance in International Standards that it prepares. This edition of IEC 61260-3 uses an amended criterion for assessing conformance to a specification. Conformance is demonstrated when (a) measured deviations from design goals do not exceed the applicable acceptance limits and (b) the uncertainty of measurement does not

Scope: 1.1 This part of IEC 61260 describes procedures for periodic testing of octave-band and fractional-octave-band filters that were designed to conform to the class 1 or class 2 specifications given in IEC 61260-1:2014. The aim of this standard is to ensure that periodic testing is performed in a consistent manner by all laboratories. 1.2 The purpose of periodic testing is to assure the user that the performance of an octave- band and fractional-octave-band filter conforms to the applicable specifications of IEC 61260- 1 for a limited set of key tests and for the environmental conditions under which the tests were performed. 1.3 The extent of the tests in this standard is deliberately restricted to the minimum considered necessary for periodic tests. 1.4 Periodic tests described in this standard apply to filters for which the manufacturer claims conformance to the specifications in IEC 61260-1:2014. Periodic tests in this standard apply to filters for which the model has been, or has not been, pattern approved by an independent testing organization responsible for pattern approvals in accordance with the test procedures of IEC 61260-2. 1.5 Because of the limited extent of the periodic tests, if evidence of pattern approval is not publicly available, no general conclusion about conformance to the specifications of IEC 61260-1 can be made, even if the results of the periodic tests conform to all applicable requirements of this standard.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61260-3-2016 PDF

IEC 61260-3-2016 PDF

$100.88 $201.76