IEC 61300-3-47-2014 PDF

IEC 61300-3-47-2014 PDF

Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-47: Examinations and measurements-End face geometry of PC/APC spherically polished ferrules using interferometry

$72.51 $145.02 -50%
Product Code: IEC 61300-3-47
Stock In Stock
Edition: 1.0
Published: 07/2014
Number of Pages: 22
File Size: 1 file, 1.8 MB

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-47: Examinations and measurements – End face geometry of PC/APC spherically polished ferrules using interferometry

Scope: This part of IEC 61300 describes a procedure to measure the end face geometry of a spherically polished ferrule or connector. Within this standard the words “ferrule” and “connector” can be used interchangeably. Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 radius of curvature radius of curvature of the portion of the spherically polished ferrule end face which is domed for physical contact Note 1 to entry: It is assumed that the end face is spherical, although in practice the end face is often aspherical (see Figure 1). IEC Figure 1 – Radius of curvature of a spherically polished ferrule end face 2.2 apex offset distance between the axis of the ferrule and the line parallel to the axis which passes through the vertex (or highest point on the dome), formed by spherically polishing the ferrule, as shown in Figure 2

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61300-3-47-2014 PDF

IEC 61300-3-47-2014 PDF

$72.51 $145.02