IEC 61322-2020 PDF

IEC 61322-2020 PDF

Radiation protection instrumentation-Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV

$211.22 $422.43 -50%
Product Code: IEC 61322
Stock In Stock
Edition: 2.0
Published: 01/2020
Number of Pages: 112
File Size: 1 file, 2 Bytes

Available Options

Product Description

Radiation protection instrumentation – Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV

Scope: This document applies to installed dose equivalent rate meters, warning assemblies and monitors, as defined below. It covers equipment intended to measure neutron radiation in dose equivalent rates in the energy region between thermal and 20 MeV for the purposes of radiation protection. Assemblies of this type are commonly defined as area radiation monitors. They are normally employed to determine continuously the radiological situation in working areas in which the radiation field may change with time, for example, nuclear power plants, particle accelerators, high-activity laboratories, fuel reprocessing plants, etc., and provide alarms when the radiation field goes outside predetermined limits. The assemblies considered in this document comprise at least: a detector assembly, which may, for example, consist of a detector probe (for thermal neutrons such as BF3 proportional counter, 3He proportional counter, 6LiI(Tl) scintillation detector, etc.) and a moderating and absorbing medium surrounding the detector; a processing assembly, which may be fitted into a centralized panel, which, in the case of warning assemblies and monitors, provides signal outputs and contacts capable of activating alarm or other trip circuits; alternatively, the case when all the processing electronics are placed within the detection unit (so called "smart blocks") may be considered. In this case the functions of the processing assembly will be composed of only the indication, the providing signal outputs and contacts. This document specifies general characteristics, general test procedures, radiation characteristics, as well as electrical, mechanical, safety, and environmental characteristics, as well as the identification certificate for the assemblies defined in the scope. Assemblies designed to perform combined functions comply with the requirements pertaining to each of these functions. This document is not applicable to criticality monitors covered by IEC 60860, or to assemblies intended to give information about operational parameters of nuclear plants for control purposes. This document is not applicable to the operating characteristics of indicating or recording instruments as

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61322-2020 PDF

IEC 61322-2020 PDF

$211.22 $422.43