IEC 61340-2-1-2022 PDF

IEC 61340-2-1-2022 PDF

Electrostatics-Part 2-1: Measurement methods-Ability of materials and products to dissipate static electric charge

$189.15 $378.30 -50%
Product Code: IEC 61340-2-1
Stock In Stock
Edition: 2.1
Published: 06/2022
Number of Pages: 54
File Size: 1 file, 1 Byte

Available Options

Product Description

Electrostatics – Part 2-1: Measurement methods – Ability of materials and products to dissipate static electric charge

Introduction: Measurements of the rate of dissipation of static charge belong to the essential measurement techniques in the field of electrostatics. For homogeneous conductive materials, this property can be evaluated indirectly by measuring resistance or resistivity parameters. Care should be exercised when determining the homogeneity of materials, as some materials that appear homogenous do exhibit non−homogeneous electrical characteristics. If the homogeneity of materials is not known and cannot be otherwise verified, it is possible that resistance measurements may will not be reliable or may will not give enough information. It is also possible that resistance measurements may also will not be reliable when evaluating materials in the dissipative or insulative range and especially for high ohmic materials including that include conductive fibres (e.g. textiles with a metallic grid). In such cases, the rate of dissipation of static charge should be measured directly.

Scope: This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and it is possible that they may will not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, e.g. for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. It is possible that the charged plate method may will not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61340-2-1-2022 PDF

IEC 61340-2-1-2022 PDF

$189.15 $378.30