Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture
Introduction: IEC 61375-1 defines the general architecture of the Train Communication Network (TCN) to achieve compatibility between consist networks and train backbones defined by the IEC 61375 series. The creation of this fourth edition of the standard has been motivated by advances in technology, namely in the fields of Ethernet communication, wireless communication, and cybersecurity, which made it necessary to adapt or to extend some sections of the TCN general architecture. These changes will then further on be reflected in the detailed technical specifications given in subsequent parts of the IEC 61375 series. The TCN has a hierarchical structure with two levels of networks, a train backbone and a consist network: a) for interconnecting vehicles in closed or open trains, this document specifies train backbones with different characteristics. b) for connecting standard on-board equipment, this document specifies consist networks with different characteristics. The general architecture of the TCN, which is defined in this document, shall does c) establish the rules for interconnecting consist networks with train backbones, as 1) identifying the interfaces; 2) defining the principles of how train topology changes can be discovered; 3) defining the basic communication services provided by train backbones to be used by consist networks; d) establish basic rules for the train backbone and for the consist network; e) establish rules for communalities commonalities in operation, as: 1) patt
Scope: This part of IEC 61375 applies to the architecture of data communication systems in open trains, i.e. it covers the architecture of a communication system for the data communication between vehicles of the said open trains, the data communication within the vehicles and the data communication from train to the ground. The applicability of this part of IEC 61375 to the train network technologies allows for interoperability of individual vehicles within open trains in international traffic. The data communication systems inside vehicles are given as recommended solutions to cope with the said TCN. In any case, proof of compatibility between a proposed train backbone and a proposed consist network will have to be brought by the supplier. This part of IEC 61375 may might be additionally applicable to closed trains and multiple unit trains when so agreed between purchaser and supplier. NOTE 1 For definitions of open trains, multiple unit trains and closed trains, see Clause 3. NOTE 2 Road vehicles such as buses and trolley buses are not considered in this part of IEC 61375.
Contents:
- FOREWORD
- INTRODUCTION
- Scope