IEC 61391-2-2010 PDF

IEC 61391-2-2010 PDF

Ultrasonics-Pulse-echo scanners-Part 2: Measurement of maximum depth of penetration and local dynamic range

$163.93 $327.86 -50%
Product Code: IEC 61391-2
Stock In Stock
Edition: 1.0
Published: 01/2010
Number of Pages: 78
File Size: 1 file, 1 Byte

Available Options

Product Description

Ultrasonics – Pulse-echo scanners – Part 2: Measurement of maximum depth of penetration and local dynamic range

Introduction: An ultrasonic pulse-echo scanner produces images of tissue in a scan plane by sweeping a narrow pulsed beam of ultrasound through the section of interest and detecting the echoes generated by reflection at tissue boundaries and by scattering within tissues. Various transducer types are employed to operate in a transmit/receive mode to generate/detect the ultrasonic signals. Ultrasonic scanners are widely used in medical practice to produce images of soft-tissue organs throughout the human body. This standard is being published in two or more parts: Part 1 deals with techniques for calibrating spatial measurement systems and measurement of system point spread function response; Part 2 deals with measurement of system sensitivity (maximum depth of penetration) and local dynamic range. This standard describes test procedures for measuring the maximum depth of penetration and the local dynamic range of these imaging systems. Procedures should be widely acceptable and valid for a wide range of types of equipment. Manufacturers should use the standard to prepare their specifications; users should employ the standard to check performance against those specifications. The measurements can be carried out without interfering with the normal working conditions of the machine. Typical phantoms are described in Annex A. The structures of the phantoms are not specified in detail; instead, suitable types of overall and internal structures for phantoms are described. Similar commercial versi

Scope: This part of IEC 61391 defines terms and specifies methods for measuring the maximum depth of penetration and the local dynamic range of real-time ultrasound B-MODE scanners. The types of transducers used with these scanners include: mechanical probes; electronic phased arrays; linear arrays; curved arrays; two-dimensional arrays; three-dimensional scanning probes based on a combination of the above types. All scanners considered are based on pulse-echo techniques. The test methodology is applicable for transducers operating in the 1 MHz to 15 MHz frequency range operating both in fundamental mode and in harmonic modes that extend to 15 MHz. However, testing of harmonic modes above 15 MHz is not covered by this standard. NOTE Phantom manufacturers are encouraged to extend the frequency range to which phantoms are specified to enable tests of systems operating at fundamental and harmonic frequencies above 15 MHz.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61391-2-2010 PDF

IEC 61391-2-2010 PDF

$163.93 $327.86