IEC 61400-21-2008 PDF

IEC 61400-21-2008 PDF

Wind turbines-Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

$211.22 $422.43 -50%
Product Code: IEC 61400-21
Stock In Stock
Edition: 2.0
Published: 08/2008
Number of Pages: 124
File Size: 1 file, 1 Byte

Available Options

Product Description

Wind turbines – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

Introduction: The purpose of this part of IEC 61400 is to provide a uniform methodology that will ensure consistency and accuracy in the presentation, testing and assessment of power quality characteristics of grid connected wind turbines (WTs). The power quality characteristics here include wind turbine specifications, voltage quality (emissions of flicker and harmonics), voltage drop response, power control (control of active and reactive power), grid protection and reconnection time. This part of IEC 61400 has been prepared with the anticipation that it would be applied by: the WT manufacturer striving to meet well-defined power quality characteristics; the WT purchaser in specifying such power quality characteristics; the WT operator who may be required to verify that stated, or required power quality characteristics are met; the WT planner or regulator who has to be able to accurately and fairly determine the impact of a WT on the voltage quality to ensure that the installation is designed so that voltage quality requirements are respected; the WT certification authority or component testing organization in evaluating the power quality characteristics of the wind turbine type; the planner or regulator of the electric network who has to be able to determine the grid connection required for a WT. This part of IEC 61400 provides recommendations for preparing the measurements and assessment of power quality characteristics of grid connected WTs. This part of IEC 61400 will benefit those p

Scope: This part of IEC 61400 includes: definition and specification of the quantities to be determined for characterizing the power quality of a grid connected wind turbine; measurement procedures for quantifying the characteristics; procedures for assessing compliance with power quality requirements, including estimation of the power quality expected from the wind turbine type when deployed at a specific site, possibly in groups. The measurement procedures are valid for single wind turbines with a three-phase grid connection. The measurement procedures are valid for any size of wind turbine, though this part of IEC 61400 only requires wind turbine types intended for PCC (Point of Common Coupling) at MV or HV to be tested and characterized as specified in this part of IEC 61400. The measured characteristics are valid for the specific configuration and operational mode of the assessed wind turbine type only. Other configurations, including altered control parameters that cause the wind turbine to behave differently with respect to power quality, require separate assessment. The measurement procedures are designed to be as non-site-specific as possible, so that power quality characteristics measured at for example a test site can be considered valid also at other sites. The procedures for assessing compliance with power quality requirements are valid for wind turbines with PCC at MV or HV in power systems with fixed frequency within ±1 Hz, and sufficient active and reactive power regulation capabilities. In other cases, the principles for assessing compliance with power quality requirements may still be used as a guidance. This part of IEC 61400 is for testing of wind turbines, though it contains information that may also be useful for testing of wind farms. NOTE This part of IEC 61400 uses the following terms for system voltage: – low voltage (LV) refers to Un ≤ 1 kV; – medium voltage (MV) refers to 1 kV < Un ≤ 35 kV; – high voltage (HV) refers to Un > 35 kV.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61400-21-2008 PDF

IEC 61400-21-2008 PDF

$211.22 $422.43