IEC 61400-50-2-2022 PDF

IEC 61400-50-2-2022 PDF

Wind energy generation systems-Part 50-2: Wind measurement-Application of ground-mounted remote sensing technology

$186.00 $371.99 -50%
Product Code: IEC 61400-50-2
Stock In Stock
Edition: 1.0
Published: 08/2022
Number of Pages: 88
File Size: 1 file, 4 Bytes

Available Options

Product Description

Wind energy generation systems – Part 50-2: Wind measurement – Application of ground-mounted remote sensing technology

Introduction: This part of IEC 61400 specifies procedures and methods which ensure that wind measurements using ground-mounted remote sensing devices are carried out and reported consistently and in accordance with best practice. This document does not define the purpose or use case of the wind measurements. However, as this document forms part of the IEC 61400 series of standards, it is anticipated that the wind measurements will be used in relation to some form of wind energy testing or resource assessment. The main clauses of this document are not mutually dependent. Therefore, it is possible that a user will refer to only certain of the main clauses rather than all clauses to adapt this document to their specific use case. However, the main clauses are presented in a logical sequence that could be applied in practice. The technical content of this document could previously be found in IEC 61400-12-1:2017 [1]1. Because of the increasing complexity of this source document, IEC TC 88 decided that a re- structuring of the IEC 61400-12 series of standards into a number of more specific parts would allow more efficient management and maintenance going forward. This document has been created as part of that re-structuring process. ___________ 1 Numbers in square brackets refer to the Bibliography.

Scope: IEC 61400-50 specifies methods and requirements for the application of instruments to measure wind speed (and related parameters, e.g. wind direction and turbulence intensity). Such measurements are required as an input to some of the evaluation and testing procedures for wind energy and wind turbine technology (e.g. resource evaluation and turbine testing) described by other standards in the IEC 61400 series. This document is applicable specifically to the use of ground-mounted remote sensing wind measurement instruments, i.e. devices which measure the wind at some location generally above and distant from the location at which the instrument is mounted (e.g. sodars, vertical profiling lidars). This document specifically excludes other types of RSD such as forward facing or scanning lidars. This document specifies the following: a) the procedure and requirements for classifying ground-based RSDs in order to assess the uncertainty pertaining from sensitivity of the RSD response to meteorological conditions that can vary between the RSD calibration place and time and the use case (specific measurement campaign – SMC) place and time; b) the procedures and requirements for calibration of RSDs; c) the assessment of wind speed measurement uncertainty; d) additional checks of the RSD performance and measurement uncertainty during the SMC; e) application of the wind speed uncertainty derived from the RSD calibration and classification to the measurements taken during the SMC (e.g. interpolation of uncertainty or calibration results to different heights); f) requirements for reporting.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61400-50-2-2022 PDF

IEC 61400-50-2-2022 PDF

$186.00 $371.99