IEC 61434-1996 PDF

IEC 61434-1996 PDF

Secondary cells and batteries containing alkaline or other non-acid electrolytes Guide to the designation of current in alkaline secondary cell and battery standards

$15.77 $31.53 -50%
Product Code: IEC 61434
Stock In Stock
Edition: 1.0
Published: 09/1996
Number of Pages: 18
File Size: 1 file, 50 Bytes

Available Options

Product Description

Secondary cells and batteries containing alkaline or other non-acid electrolytes Guide to the designation of current in alkaline secondary cell and battery standards

Introduction: In alkaline secondary cell and battery standards and in the industry in general, charge and discharge currents have traditionally been expressed as fractions or multiples of C, where C is the rated capacity of the cell or battery in ampere hours (Ah). Objections have been raised that to divide or multiply C results in a fraction or multiple of Ah and it is therefore mathematically incorrect to express current (amperes (A)) in this way.

Scope: This International Standard applies to secondary cells and batteries containing alkaline or other non-acid electrolytes. It proposes a mathematically correct method of current designation which shall be used in future secondary cell and battery standards. 2 Method of designation The reference test current as specified in the various test methods detailed in a standard shall be expressed as: Ah where It is the reference test current, in amperes; Cn is the rated capacity of the cell or battery as declared by the manufacturer, in ampere-hours; is the time base (hours) for which the rated capacity is declared. All charge and discharge currents shall then be expressed as fractions or multiples of It. The value of n used in the standard determines only the fraction or multiple of It used for the various specified purposes in that standard. For example, if n = 5, then the discharge current used to verify the rated capacity shall be 0,2 ItA. If n = 1, the discharge current used to verify the rated capacity shall be 1,0 ItA. Note that the value of n used in the standard has no effect on the value of It. The numerical value of It will always be equal to the numerical value of Cn regardless of the value of n. __________

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61434-1996 PDF

IEC 61434-1996 PDF

$15.77 $31.53