IEC 61508-2-2010 PDF

IEC 61508-2-2010 PDF

Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems

$255.36 $510.71 -50%
Product Code: IEC 61508-2
Stock In Stock
Edition: 2.0
Published: 04/2010
Number of Pages: 192
File Size: 1 file, 2 Bytes

Available Options

Product Description

Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems

Introduction: Systems comprised of electrical and/or electronic elements have been used for many years to perform safety functions in most application sectors. Computer-based systems (generically referred to as programmable electronic systems) are being used in all application sectors to perform non-safety functions and, increasingly, to perform safety functions. If computer system technology is to be effectively and safely exploited, it is essential that those responsible for making decisions have sufficient guidance on the safety aspects on which to make these decisions. This International Standard sets out a generic approach for all safety lifecycle activities for systems comprised of electrical and/or electronic and/or programmable electronic (E/E/PE) elements that are used to perform safety functions. This unified approach has been adopted in order that a rational and consistent technical policy be developed for all electrically-based safety-related systems. A major objective is to facilitate the development of product and application sector international standards based on the IEC 61508 series. NOTE 1 Examples of product and application sector international standards based on the IEC 61508 series are given in the Bibliography (see references [1], [2] and [3]). In most situations, safety is achieved by a number of systems which rely on many technologies (for example mechanical, hydraulic, pneumatic, electrical, electronic, programmable electronic). Any safety strategy must therefore c

Scope: 1.1 This part of the IEC 61508 series a) is intended to be used only after a thorough understanding of IEC 61508-1, which provides the overall framework for the achievement of functional safety; b) applies to any safety-related system, as defined by IEC 61508-1, that contains at least one electrical, electronic or programmable electronic element; c) applies to all elements within an E/E/PE safety-related system (including sensors, actuators and the operator interface); d) specifies how to refine the E/E/PE system safety requirements specification, developed in accordance with IEC 61508-1 (comprising the E/E/PE system safety functions requirements specification and the E/E/PE system safety integrity requirements specification), into the E/E/PE system design requirements specification; e) specifies the requirements for activities that are to be applied during the design and manufacture of the E/E/PE safety-related systems (i.e. establishes the E/E/PE system safety lifecycle model) except software, which is dealt with in IEC 61508-3 (see Figures 2 to 4). These requirements include the application of techniques and measures that are graded against the safety integrity level, for the avoidance of, and control of, faults and failures; f) specifies the information necessary for carrying out the installation, commissioning and final safety validation of the E/E/PE safety-related systems; g) does not apply to the operation and maintenance phase of the E/E/PE safety-related systems – this is dealt with in IEC 61508-1 – however, IEC 61508-2 does provide requirements for the preparation of information and procedures needed by the user for the operation and maintenance of the E/E/PE safety-related systems; h) specifies requirements to be met by the organisation carrying out any modification of the E/E/PE safety-related systems; NOTE 1 This part of IEC 61508 is mainly directed at suppliers and/or in-company engineering departments, hence the inclusion of requirements for modification. NOTE 2 The relationship between IEC 61508-2 and IEC 61508-3 is illustrated in Figure 4. i) does not apply for medical equipment in compliance with the IEC 60601 series. 1.2 IEC 61508-1, IEC 6150

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 7.4.10 Requirements for proven in use elements
  • 7.4.11 Additional requirements for data communications

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61508-2-2010 PDF

IEC 61508-2-2010 PDF

$255.36 $510.71