IEC 61508-7-2010 PDF

IEC 61508-7-2010 PDF

Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 7: Overview of techniques and measures

$271.12 $542.23 -50%
Product Code: IEC 61508-7
Stock In Stock
Edition: 2.0
Published: 04/2010
Number of Pages: 300
File Size: 1 file, 2 Bytes

Available Options

Product Description

Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 7: Overview of techniques and measures

Introduction: Systems comprised of electrical and/or electronic elements have been used for many years to perform safety functions in most application sectors. Computer-based systems (generically referred to as programmable electronic systems) are being used in all application sectors to perform non-safety functions and, increasingly, to perform safety functions. If computer system technology is to be effectively and safely exploited, it is essential that those responsible for making decisions have sufficient guidance on the safety aspects on which to make these decisions. This International Standard sets out a generic approach for all safety lifecycle activities for systems comprised of electrical and/or electronic and/or programmable electronic (E/E/PE) elements that are used to perform safety functions. This unified approach has been adopted in order that a rational and consistent technical policy be developed for all electrically-based safety-related systems. A major objective is to facilitate the development of product and application sector international standards based on the IEC 61508 series. NOTE 1 Examples of product and application sector international standards based on the IEC 61508 series are given in the bibliography (see references [21], [22] and [37]). In most situations, safety is achieved by a number of systems which rely on many technologies (for example mechanical, hydraulic, pneumatic, electrical, electronic, programmable electronic). Any safety strategy must therefor

Scope: 1.1 This part of IEC 61508 contains an overview of various safety techniques and measures relevant to IEC 61508-2 and IEC 61508-3. The references should be considered as basic references to methods and tools or as examples, and may not represent the state of the art. 1.2 IEC 61508-1, IEC 61598-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.3 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are also intended for use as stand-alone publications. The horizontal safety function of this international standard does not apply to medical equipment in compliance with the IEC 60601 series. 1.3 One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the publications prepared by those technical committees. 1.4 Figure 1 shows the overall framework for parts 1 to 7 of IEC 61508 and indicates the role that IEC 61508-7 plays in the achievement of functional safety for E/E/PE safety-related systems. – 8 – 61508-7 © IEC:2010 Part 1 Specification of the system safety requirements for the E/E/PE safety-related systems 7.10 Part 1 Operation, maintenance,repair, modification and retrofit, decommissioning or disposal of E/E/PE safety-related systems 7.15 - 7.17 Part 1 Allocation of the safety requirements to the E/E/PE safety-related systems 7.6 Part 1 Installation, commissioning & safety validation of E/E/PE safety-related systems 7.13 - 7.14 Part 1 Development of the overall safety requirements (concept, scope, definition, hazard and risk analysis) 7.1 to 7.5 Part 6 Guidelines for the application of Parts 2 & 3 Part 7 Overview of techniques and measures Part 5 Example of methods for the de

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61508-7-2010 PDF

IEC 61508-7-2010 PDF

$271.12 $542.23