IEC 61754-7-2008 PDF

IEC 61754-7-2008 PDF

Fibre optic interconnecting devices and passive components-Fibre optic connector interfaces-Part 7: Type MPO connector family

$132.41 $264.81 -50%
Product Code: IEC 61754-7
Stock In Stock
Edition: 3.0
Published: 03/2008
Number of Pages: 32
File Size: 1 file

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 7: Type MPO connector family

Scope: This part of IEC 61754 defines the standard interface dimensions for type MPO family of connectors. Description The parent connector for type MPO connector family is a multiway plug connector charac- terized by a rectangular ferrule normally 6,4 mm × 2,5 mm which utilizes two pins of 0,7 mm diameter as its alignment. It is applicable to a joint of multiple fibres up to 12 fibres by arraying them between two pin-positioning holes in the ferrule. Furthermore, it is capable of joining up to 24 fibres by arraying them with a two layer arrangement. The connector includes a push-pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The connector has a single male key which may be used to orient and limit the relative position between the connector and the component to which it is mated. Connector interfaces are configured using a female plug without pins, a male plug with pins fixed and an adaptor as shown in Figure 1. The female plug is intermateable with the male plug. Moreover, connector interfaces between the female plug and the male plug are configured by applying a backplane housing and a printed board housing instead of the adaptor. Interfaces This standard contains the following standard interfaces: Interface 7-1: MPO female plug connector angled interface – Push/pull consisting of: Interface 7-1-1 for 2 to 12 fibres Interface 7-1-2 for 16 to 24 fibres Interface 7-2: MPO male plug connector angled interface – Push/pull consisting of: Interface 7-2-1 for 2 to 12 fibres Interface 7-2-2 for 16 to 24 fibres Interface 7-3: MPO adaptor interface – Push/pull Interface 7-4: MPO female plug connector flat interface – Push/pull consisting of: Interface 7-4-1 for 2 to 12 fibres Interface 7-4-2 for 16 to 24 fibres Interface 7-5: MPO male plug connector flat interface – Push/pull consisting of: Interface 7-5-1 for 2 to 12 fibres Interface 7-5-2 for 16 to 24 fibres Interface 7-6: MPO backplane housing interface – Self-retaining Interface 7-7: MPO printed board housing interface – Self-retaining

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61754-7-2008 PDF

IEC 61754-7-2008 PDF

$132.41 $264.81