IEC 61788-17-2021 PDF

IEC 61788-17-2021 PDF

Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films

$242.00 $484.00 -50%
isbn 9782832210220
Product Code: IEC 61788-17
Stock In Stock
Edition: 2.0
Published: 04/01/2021
Number of Pages: 88
File Size: 1 file, 3 Bytes

Available Options

Product Description

Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films

Introduction: Over thirty years after their discovery in 1986, high-temperature superconductors are now finding their way into products and technologies that will revolutionize information transmission, transportation, and energy. Among them, high-temperature superconducting (HTS) microwave filters, which exploit the extremely low surface resistance of superconductors, have already been commercialized. They have two major advantages over conventional non-superconducting filters, namely: low insertion loss (low noise characteristics) and high frequency selectivity (sharp cut) [1]1. These advantages enable a reduced number of base stations, improved speech quality, more efficient use of frequency bandwidths, and reduced unnecessary radio wave noise. Large-area superconducting thin films have been developed for use in microwave devices [2]. They are also considered for use in emerging superconducting power devices, such as resistive- type superconducting fault-current limiters (SFCLs) [3] [4] [5], superconducting fault detectors used for superconductor-triggered fault current limiters [6] [7] and persistent-current switches used for persistent-current HTS magnets [8] [9]. The critical current density Jc is one of the key parameters that describe the quality of large-area HTS films. Nondestructive, AC inductive methods are widely used to measure Jc and its distribution for large-area HTS films [10] [11] [12] [13], among which the method utilizing third-harmonic voltages U3cos(3ωt + θ) is the m

Scope: This part of IEC 61788 specifies the measurements of the local critical current density (Jc) and its distribution in large-area high-temperature superconducting (HTS) films by an inductive method using third-harmonic voltages. The most important consideration for precise measurements is to determine Jc at liquid nitrogen temperatures by an electric-field criterion and obtain current-voltage characteristics from its frequency dependence. Although it is possible to measure Jc in applied DC magnetic fields [20] [21], the scope of this document is limited to the measurement without DC magnetic fields. This technique intrinsically measures the critical sheet current that is the product of Jc and the film thickness d. The range and measurement resolution for Jcd of HTS films are as follows. Jcd: from 200 A/m to 32 kA/m (based on results, not limitation). Measurement resolution: 100 A/m (based on results, not limitation).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61788-17-2021 PDF

IEC 61788-17-2021 PDF

$242.00 $484.00