Electric and magnetic field levels generated by AC power systems – Measurement procedures with regard to public exposure
Introduction: All populations of the world are now exposed to electric and magnetic fields and the levels will continue to increase with developing industry and technology. A number of countries have implemented regulations on public exposure to these fields. Therefore, in order to evaluate human exposure levels to these fields adequately, common measurement procedures are required by not only professionals of national authorities and electric power industries, but also the general public. This standard is applied to the measurement of fields generated by AC power systems in areas accessible to the public. It establishes a common measurement procedure to evaluate the exposure levels of the human body to electric and magnetic fields among the general public. The values obtained are for use to determine whether the fields comply with exposure limits by comparing them with the field limits for general public exposure such as the reference levels from the ICNIRP (International Commission on Non-Ionizing Radiation Protection) Guidelines [1]1), MPE (maximum permissible exposure) from the IEEE (Institute of Electrical and Electronics Engineers) [2] or in national regulations. If the values obtained are higher than the reference level or MPE, it does not necessarily mean that the basic restriction has been exceeded, in which case other methods must be used to ensure that basic restriction is not exceeded. The values obtained by using the procedures in this standard are for the load conditions occu
Scope: This International Standard establishes measurement procedures for electric and magnetic field levels generated by AC power systems to evaluate the exposure levels of the human body to these fields. This standard is not applicable to DC power transmission systems. This International Standard is applicable to public exposure in the domestic environment and in areas accessible to the public. This standard specifies fundamental procedures for the measurement of fields, and, with regard to human exposure, for obtaining a field value that corresponds to a spatial average over the entire human body. This standard is not applicable to occupational exposure associated with, for example, the operation and/or maintenance of the power systems. Such exposure may occur when working inside a distribution or transmission substation, a power plant, in a manhole or a tunnel for underground cables, or on an overhead line tower or pole.
Contents:
- FOREWORD
- INTRODUCTION
- Scope