IEC 62127-1-2022 PDF

IEC 62127-1-2022 PDF

Ultrasonics-Hydrophones-Part 1: Measurement and characterization of medical ultrasonic fields

$255.36 $510.71 -50%
Product Code: IEC 62127-1
Stock In Stock
Edition: 2.0
Published: 03/2022
Number of Pages: 218
File Size: 1 file, 3 Bytes

Available Options

Product Description

Ultrasonics – Hydrophones – Part 1: Measurement and characterization of medical ultrasonic fields

Introduction: The main purpose of this document is to define various acoustic parameters that can be used to specify and characterize ultrasonic fields propagating in liquids, and, in particular, water, using hydrophones. Measurement procedures are outlined that may be used to determine these parameters. Specific device related measurement standards, for example IEC 61689, IEC 61157, IEC 61847 or IEC 62359, can refer to this document for appropriate acoustic parameters. In IEC 62359, some additional measurement methods for attenuated parameters and indices are described addressing the specific needs of acoustic output characterization of ultrasonic diagnostic equipment in accordance with IEC 60601-2-37. The philosophy behind this document is the specification of the acoustic field in terms of acoustic pressure parameters, acoustic pressure being the primary measurement quantity when hydrophones are used to characterize the field. Intensity parameters are specified in this document, but these are regarded as derived quantities that are meaningful only under certain assumptions related to the ultrasonic field being measured.

Scope: This part of IEC 62127 specifies methods of use of calibrated hydrophones for the measurement in liquids of acoustic fields generated by ultrasonic medical equipment including bandwidth criteria and calibration frequency range requirements in dependence on the spectral content of the fields to be characterized. This document: defines a group of acoustic parameters that can be measured on a physically sound basis; defines a second group of parameters that can be derived under certain assumptions from these measurements, and called derived intensity parameters; defines a measurement procedure that can be used for the determination of acoustic pressure parameters; defines the conditions under which the measurements of acoustic parameters can be made using calibrated hydrophones; defines procedures for correcting for limitations caused by the use of hydrophones with finite bandwidth and finite active element size, and for estimating the corresponding uncertainties. NOTE 1 Throughout this document, SI units are used. In the specification of certain parameters, such as beam areas and intensities, it can be convenient to use decimal multiples or submultiples. For example, beam area is likely to be specified in cm2 and intensities in W/cm2 or mW/cm2. NOTE 2 The hydrophone as defined can be of a piezoelectric or an optic type.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62127-1-2022 PDF

IEC 62127-1-2022 PDF

$255.36 $510.71