IEC 62236-4 (REDLINE + STANDARD)-2018 PDF

IEC 62236-4 (REDLINE + STANDARD)-2018 PDF

Railway applications-Electromagnetic compatibility-Part 4: Emission and immunity of the signalling and telecommunications apparatus

$123.58 $247.16 -50%
Product Code: IEC 62236-4 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 02/2018
Number of Pages: 60
File Size: 1 file, 1.3 MB

Available Options

Product Description

Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus

Introduction: This part of IEC 62236 has been prepared in the form of a Product Standard. It defines the immunity and emission test requirements for apparatus defined in the scope in relation to the electromagnetic disturbances likely to be experienced in the railway. In particular, the test requirements represent the essential electromagnetic immunity requirements and have been selected to ensure an adequate level of immunity for apparatus installed in on the railway locations. Test requirements are specified for each port considered. Safety considerations are not covered by this document. In special specific situations, where the level of disturbances may exceed the levels considered in this document, e.g. at a special location or where a hand-held transmitter is used in very close proximity to an apparatus, special mitigation measures may have to be necessary employed.

Scope: This part of IEC 62236 applies to signalling and telecommunication apparatus that is installed inside the railway environment. Signalling and telecommunication apparatus mounted in vehicles is covered by IEC 62236-3-2:2018, signalling and telecommunication apparatus installed inside the substation and connected to substation equipment is covered by IEC 62236-5:2018. This document specifies limits for emission and immunity and provides performance criteria for signalling and telecommunications (S&T) apparatus (including power supply systems belonging to S&T) which may interfere with other apparatus inside the railway environment, or increase the total emissions for the railway environment beyond the limits defined in the appropriate standard and so risk causing Electromagnetic Interference (EMI) to apparatus outside the railway system. Apparatus which complies with the emission levels of IEC 61000-6-4 will meet the emission requirements of this standard provided that emissions from any d.c. power port are within the emissions limits specified for a.c. power ports. The immunity levels of IEC 61000-6-2 will also be adequate except for the special case of apparatus as defined in Note 1 of Table 1. This standard provides the immunity requirements for such apparatus. The immunity levels given for the apparatus will in most cases allow the apparatus to perform as intended in the railway environment (see Note). The immunity level establishes a common reference for evaluating the performance of the apparatus when subject to interference resulting from direct exposure of the apparatus and associated cables to a radio frequency field, or by coupling of the interference from a remote source. The requirements specified in this document apply for: vital equipment such as interlocking or command and control, apparatus inside the 3 m zone, ports of apparatus inside the 10 m zone with connection inside the 3 m zone, ports of apparatus inside the 10 m zone with cable length > 30 m. Other apparatus not covered by at least one of these given cases is in compliance with IEC 61000-6-2. If a port is intended to transmit or receive for the purpose of radio communication (intentional ra

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62236-4 (REDLINE + STANDARD)-2018 PDF

IEC 62236-4 (REDLINE + STANDARD)-2018 PDF

$123.58 $247.16