Maritime navigation and radiocommunication equipment and systems VHF radiotelephone equipment incorporating Class "D" Digital Selective Calling (DSC) Methods of testing and required test results
Introduction: Equipment designed to this International Standard is intended to provide compatibility with the Global Maritime Distress and Safety System (GMDSS) for fitting to vessels to which the International Convention on the Safety of Life at Sea (SOLAS) 1974 does not apply. Such vessels are typically small commercial vessels, pleasure vessels, fishing vessels, etc. The equipment does not meet all the requirements of the International Maritime Organization (IMO) for SOLAS vessels. However, it does meet the IMO guidelines for non-SOLAS vessels in that it is capable of maintaining a listening watch on VHF channel 16 simultaneously with a watch on DSC channel 70. The equipment is further capable of both transmitting and receiving distress alerts by DSC on channel 70, thus providing for the safety of own ship together with the ability to assist other ships in distress. The emphasis in this standard is on simplicity of operation. The VHF equipment uses DSC controllers based on Class D, which will probably be integrated in the VHF radio equipment but in any event will have the capability to select the radio channels automatically. An input for position information in IEC 61162-1 format is a requirement and the use of automatic position updating is to be encouraged. Distress calls may only be made by means of a protected dedicated button. Furthermore, channel 16 is required to be selected automatically after transmission of a distress or urgency call. Position is included in the distress call
Scope: This International Standard covers the minimum requirements for general communication for shipborne fixed installations using a VHF radiotelephone incorporating class “D” Digital Selective Calling. These requirements include the relevant provisions of the ITU Radio Regulations, ITU-R Recommendations M.493-10 where class D is defined, and incorporate the relevant guidelines of the IMO as detailed in MSC/Circ. 803, MSC/Circ. 862 and Resolution MSC.131(75). This standard also specifies technical characteristics, methods of measurement and required test results. Recommended standards for equipment intended to work in high level electromagnetic environments are described and included in annex D.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 4.10 Warm up
- 6.10 Measurement uncertainty and interpretation of the measured results
- 6.11 Test conditions, power sources, and ambient temperatures
- 6.12 Normal test conditions
- 6.13 Extreme test conditions
- 6.14 Procedure for tests at extreme temperatures