Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - Part 1: Generic RAMS process
Introduction: IEC 62278:2002 was aimed at introducing the application of a systematic RAMS management process in the railway sector. Through the application of IEC 62278:2002 and the experiences gained over the last years, the need for revision and restructuring became apparent with a need to deliver a systematic and coherent approach to RAMS applicable to all the railway application fields including signalling, rolling stock and fixed installations. This document provides railway duty holders and the railway suppliers with a process which will enable the implementation of a consistent approach to the management of reliability, availability, maintainability and safety, denoted by the acronym RAMS. Processes for the specification and demonstration of RAMS requirements are cornerstones of this document. This document promotes a common understanding and approach to the management of RAMS. The IEC 62278 series is derived from the European Standard series EN 50126:2017, consisting of EN 50126-1:2017 and EN 50126-2:2017. With regard to safety, this document provides a safety management process which is supported by guidance and methods described in IEC 62278-2. IEC 62278-1 and IEC 62278-2 are independent from the technology used. As far as safety is concerned, IEC 62278 takes the perspective of safety with a functional approach. The application of this document can be adapted to the specific requirements for the system under consideration. This document can be applied systematically by the railw
Scope: This document addresses railway specifics, enables conflicts between RAMS elements to be controlled and managed effectively. This document specifies: a) a process, based on the system life cycle and tasks within it, for managing RAMS; b) a systematic process, tailorable to the type and size of the system under consideration, for specifying requirements for RAMS and demonstrating that these requirements are achieved. This document does not specify: c) RAMS targets, quantities, requirements or solutions for specific railway applications; d) rules or processes pertaining to the certification of railway products against the requirements of this document; e) an approval process for the railway stakeholders. This document is applicable to railway application fields, including signalling, rolling stock and fixed installations, and specifically: f) to the specification and demonstration of RAMS for all railway applications and at all levels of such an application, as appropriate, from complete railway systems to major systems and to individual and combined subsystems and components within these major systems, including those containing software; in particular: 1) to new systems; 2) to new systems integrated into existing systems already accepted, but only to the extent and insofar as the new system with the new functionality is being integrated. It is otherwise not applicable to any unmodified aspects of the existing system; 3) as far as reasonably practicable, to modifications and extensions of existing systems already accepted, but only to the extent and insofar as existing systems are being modified. It is otherwise not applicable to any unmodified aspect of the existing system; g) at all relevant phases of the life cycle of an application; h) for use by railway duty holders and the railway suppliers. This document is not applicable to: i) any unmodified aspects of the existing system; j) existing systems which remain unmodified, including those systems already compliant with IEC 62278:2002.
Contents:
- FOREWORD
- INTRODUCTION
- Scope