IEC 62282-4-101 (REDLINE + STANDARD)-2022 PDF

IEC 62282-4-101 (REDLINE + STANDARD)-2022 PDF

Fuel cell technologies-Part 4-101: Fuel cell power systems for electrically powered industrial trucks-Safety

$359.39 $718.77 -50%
Product Code: IEC 62282-4-101 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 08/2022
Number of Pages: 168
File Size: 1 file

Available Options

Product Description

Fuel cell technologies – Part 4-101: Fuel cell power systems for electrically powered industrial trucks – Safety

Introduction: The IEC 62282-4 series deals with categories such as safety, performance and interchangeability of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Among the categories mentioned above, this document, IEC 62282-4-101, focuses on safety of electrically powered industrial electric trucks with fuel cell power systems because such applications are urgently demanded in the world. Future documents in this part of IEC 62282-4 will deal with other applications related to onboard vehicles other than road vehicles and auxiliary power units (APU).

Scope: This document deals with safety of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). This part of IEC 62282 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks as defined in ISO 5053-1, except for: rough-terrain trucks; non-stacking low-lift straddle carriers; stacking high-lift straddle carriers; rough-terrain variable-reach trucks; slewing rough-terrain variable-reach trucks; variable-reach container handlers; pedestrian propelled trucks. This standard is limited to electrically powered industrial trucks and is applicable to material- handling equipment, e.g. forklifts. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: gaseous hydrogen; methanol. This document covers the fuel cell power system as defined in 3.8 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding 150 V DC for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. In accordance with IEC Guide 116, significant hazards, hazardous situations and events dealt with in this document are shown in Annex B. The following are not included in the scope of this document: detachable type fuel source containers; hybrid trucks that include an internal combustion engine; reformer-equipped fuel cell power systems; – 10 – IEC 62282-4-101:2022 RLV © IEC 2022 fuel cell power systems intended for operation in potentially explosive atmospheres; fuel storage systems using liquid hydrogen. Key EMD electromagnetic disturbance EMI electromagnetic interference NOTE A fuel cell power system may can contain all or some of the above components. Figure 1 – Fuel cell power systems for industrial trucks IEC Water Coolant Excess/released fuel System boundary Fuel (hydrogen, methanol) Waste heat Oxidant (air) Ventilation air Electrical power output Discha

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62282-4-101 (REDLINE + STANDARD)-2022 PDF

IEC 62282-4-101 (REDLINE + STANDARD)-2022 PDF

$359.39 $718.77