Digital addressable lighting interface - Part 351: Particular requirements - Control devices - Luminaire-mounted control devices
Introduction: The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment and contains several parts, referred to as a series. The IEC 62386-1xx series includes the basic specifications. IEC 62386-101 contains general requirements for system components, IEC 62386-102 extends this information with general requirements for control gear and IEC 62386-103 extends it further with general requirements for control devices. IEC 62386-104 gives requirements for wireless and alternative wired system components. IEC 62386-105 describes firmware transfer. IEC 62386-150 gives requirements for an auxiliary power supply which can be stand-alone, or built into control gear or control devices. The IEC 62386-2xx series extends the general requirements for control gear with lamp specific extensions and with control gear specific features. The IEC 62386-3xx series extends the general requirements for control devices with input device specific extensions describing the instance types, as well as some common features that can be combined with application controllers and instance types. This document is intended to be used in conjunction with IEC 62386-101 and IEC 62386-103 and with the various parts that make up the IEC 62386-3xx series of particular requirements for control devices. The division into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. The
Scope: This part of IEC 62386 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices. This document is only applicable to control devices complying with IEC 62386-103.
Contents:
- FOREWORD
- INTRODUCTION
- Scope