IEC 62415-2010 PDF

IEC 62415-2010 PDF

Semiconductor devices-Constant current electromigration test

$25.22 $50.44 -50%
Product Code: IEC 62415
Stock In Stock
Edition: 1.0
Published: 05/2010
Number of Pages: 26
File Size: 1 file, 915 Bytes

Available Options

Product Description

Semiconductor devices – Constant current electromigration test

Scope: This standard describes a method for conventional constant current electromigration testing of metal lines, via string and contacts. Symbols, terms and definitions For the purposes of this document, the following symbols, terms and definitions apply: 2.1 Symbols 2.1.1 Jvia_use the maximum current density permitted to flow in a via of a real product 2.1.2 Jline_use the maximum current density permitted to flow in a line of a real product 2.1.3 Jvia_test the current density in a via of a test structure during electromigration test 2.1.4 Jline_test the current density in a line of a test structure during electromigration test 2.1.5 t(x %) time to failure of x % of the population NOTE The method for calculation of t (50 %) is described in Clause 8. 2.2 Terms and definitions 2.2.1 TEG test element group. This is the test structure used for the test 2.2.2 Blech length the line length below which electromigration time to failure increases sharply [1]1 NOTE The drift of metal atoms causes stress build-up in the metal lines, which caused a back flow of atoms. For short lines the stress gradient is higher than for long lines with the same current density. The forward flow increases more rapidly with current density than the backflow, and consequently the Blech length is inversely proportional to the current density. The Blech length can be determined by using a chain with different line lengths between the vias. ___________ 1 Figures in square brackets refer to the Bibliography. – 12 – 62415 © CEI:2010 AVANT-PROPOS..................................................................................................................13 Domaine d'application ....................................................................................................15 Symboles, termes et définitions ......................................................................................15 2.1 Symboles ..............................................................................................................15 2.2 Termes et définitions .............................................................................................15 Contexte...................................................

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62415-2010 PDF

IEC 62415-2010 PDF

$25.22 $50.44