Semiconductor devices – Hot carrier test on MOS transistors
Scope: This standard describes the wafer level hot carrier test on NMOS and PMOS transistors. The test is intended to determine whether the single transistors in a certain (C)MOS process meet the required hot carrier lifetime. Abbreviations and letter symbols In this document the following abbreviations and letter symbols apply: MOS Metal Oxide Semiconductor NMOS n-channel MOS transistor PMOS p-channel MOS transistor (C)MOS Complementary MOS L [μm] length of polysilicon gate of MOS transistor W [μm] width of polysilicon gate of MOS transistor Lnominal [μm] minimum L allowed by the design rules of the process Wnominal [μm] minimum W allowed by the design rules of the process Vgs [V] gate-source voltage of MOS transistor Vds [V] drain-source voltage of MOS transistor Vbs [V] backgate-source voltage of MOS transistor Ids [μA]: drain-source current of MOS transistor Ib [μA] substrate current of MOS transistor Ig [nA] gate current of MOS transistor Vgs,stress [V] Vgs biasing condition during hot carrier stress Vds,stress [V] Vds biasing condition during hot carrier stress Vds,use_max [V] maximum Vds allowed by the design rules of the process as stated in the design manual Vds,breakdown [V] Vds at which avalanche or punch-through currents become dominant; defined as Vds at which Ids= 1,5 × (Ids at Vds,use_max) while Vgs= Vds,use_max Vt [V] threshold voltage of MOS transistor defined as Vgs voltage at which Ids= 0,01 × W / L [μA]. Other (commonly agreed) definitions of Vt are also allowed as long as this is clearly reported. gm [μA/V] transconductance of MOS transistor gm,max [μA/V] maximum transconductance of MOS transistor Ids,sat [μA] saturated drain-source current at Vgs= Vds= Vds,use_,max; Ids,sat_forward measured with source and drain having same polarity as during stress, Ids,sat_reverse measured with source and drain polarity interchanged with respect to stress. L( MOST) length of the square MOS transistor (L = W) gm,max ( MOST) gm,max of the square MOS transistor (L = W) – 12 – 62416 © CEI:2010 AVANT-PROPOS..................................................................................................................13 Domaine d’application ........................
Contents:
- FOREWORD
- Scope
- 10 Lifetime requirements
- 11 Reporting