Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes on semiconductor devices
Introduction: Many companies in the electronics industry have adopted tin-based surface finishes as one of the methods to comply with various legislative lead-free (Pb-free) initiatives, e.g., the European Union’s RoHS directive. However, tin (Sn) and tin alloy surface finishes may be prone to tin whisker formation with associated possible reliability degradation. Appropriate mitigation practices may be incorporated to reduce tin whisker propensity to an acceptable level. Test conditions in accordance with Annex A and qualification limits presented in this International Standard are based on known Sn whisker data from around the world. These test conditions have not been correlated with longer environmental exposures of components in service. Thus, there is at present no way quantitatively to predict whisker lengths over long time periods based on the lengths measured in the short-term tests described in this document. At the time of writing, the fundamental mechanisms of tin whisker growth are not fully understood and acceleration factors have not been established. Therefore, the testing described in this document does not guarantee that whiskers will or will not grow under field life conditions.
Scope: This International Standard describes the methodology applicable for environmental acceptance testing of tin-based surface finishes and mitigation practices for tin whiskers on semiconductor devices. This methodology may not be sufficient for applications with special requirements, (i.e. military, aerospace, etc.). Additional requirements may be specified in the appropriate requirements (procurement) documentation. This International Standard does not apply to semiconductor devices with bottom-only terminations where the full plated surface is wetted during assembly (for example: quad-flat no-leads and ball grid array components, flip chip bump terminations). Adherence to this standard includes meeting the reporting requirements described in Clause 6. Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 base metal metal alloy residing beneath all surface finish(es) and/or underplate Figure 1 – Cross-sectional view of component surface finishes 2.2 tin and tin alloy surface finish tin-based outer surface finish for external component terminations and other exposed metal 2.3 tin whisker mitigation practice process(es) performed during the manufacture of a component to reduce the propensity for tin whisker growth by minimizing the surface finish internal compressive stress Surface finish Underplate (if applicable) Base metal IEC 2381/13 – 48 – 62483 © CEI:2013 Domaine d'application .................................................................................................... 54 Termes et définitions ...................................................................................................... 54 Méthode d'essai pour la mesure du développement des trichites d'étain ......................... 60 3.1 Procédure ............................................................................................................. 60 3.2 Echantillons pour essai ......................................................................................... 61 3.3 Mesure de prévention de manipulation .................................................................. 61 3.4 Assemblage par refusion .............................
Contents: