IEC 62505-1-2016 PDF

IEC 62505-1-2016 PDF

Railway applications-Fixed installations-Particular requirements for AC switchgear-Part 1: Circuit-breakers with nominal voltage above 1 kV

$132.41 $264.81 -50%
Product Code: IEC 62505-1
Stock In Stock
Edition: 2.0
Published: 02/2016
Number of Pages: 58
File Size: 1 file, 859 Bytes

Available Options

Product Description

Railway applications – Fixed installations – Particular requirements for AC switchgear – Part 1: Circuit-breakers with nominal voltage above 1 kV

Introduction: The IEC 62505 series under the generic title Railway applications – Fixed installations – Particular requirements for a.c. switchgear, is divided as follows: Part 1: Circuit-breakers with nominal voltage above 1 kV. Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV. Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems – Application guide. Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems – Single-phase current transformers. Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems – Single-phase inductive voltage transformers. IEC 62505-1 has to be used in conjunction with IEC 62271-1:2007 and IEC 62271-100:2008 and its Amendment 1:2012. References in subclauses of IEC 62271-1:2007 and IEC 62271-100:2008 need to be replaced by references to applicable subclauses in this standard as far as reasonably possible. Where a particular clause of IEC 62271-1:2007 or IEC 62271-100:2008 is not mentioned in this standard, that clause applies as far as reasonable. Where requirements relate exclusively to three-phase systems or to voltages outside those in use in traction systems, they are not applicable. Where this standard states "addition" or "replacement", the relevant text of IEC 62271-1:2007 and IEC 62271-100:2008 needs to be adapted accordingly. The numbering of clauses in the IEC 62271 series is not used in this Standard.

Scope: This part of IEC 62505 is applicable to single-pole and two-pole alternating current (a.c.) circuit-breakers which are: designed for indoor or outdoor fixed installations in tractions systems, and operated with an a.c. line voltage and frequency as specified in IEC 60850:2014. NOTE 1 IEC 60850 specifies the a.c. traction systems: 15 kV 16,7 Hz, 12 kV 25 Hz, 12,5 kV, 20 kV also 25 kV with 50 Hz and 12,5 kV, 20 kV, 25 kV also 50 kV with 60 Hz. NOTE 2 As rails of a.c. traction systems are typically connected to earth and included in the return current path all phase to earth voltages will be within the tolerances as specified in IEC 60850. Nevertheless phase to phase voltages are sometimes higher, e.g. in autotransformer systems. This Standard is also applicable to the operating devices of circuit-breakers and to their auxiliary equipment. This Standard does not address circuit-breakers with dependent manual operating mechanism. NOTE 3 It is impossible to specify a short-circuit making current for these circuit-breakers and it is likely that such dependent manual operation is not meeting safety considerations.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62505-1-2016 PDF

IEC 62505-1-2016 PDF

$132.41 $264.81