IEC 62595-2-4-2020 PDF

IEC 62595-2-4-2020 PDF

Display lighting unit-Part 2-4: Electro-optical measuring methods of laser module

$239.59 $479.18 -50%
Product Code: IEC 62595-2-4
Stock In Stock
Edition: 1.0
Published: 09/2020
Number of Pages: 78
File Size: 1 file, 7 Bytes

Available Options

Product Description

Display lighting unit – Part 2-4: Electro-optical measuring methods of laser module

Introduction: Laser modules, in general, have been used widely for various applications such as, optical communications, laser beam machining, bar-code reading, optical disc drives and so on. The laser module in this document is limited to display applications. It is a key light source for laser displays, laser backlight/front light units for liquid crystal displays (LCDs), holographic displays and so on. A typical laser module for display applications comprises multiple laser devices, electrical inputs and an optical output combining the outputs of the laser diodes (LDs). The laser device used in the laser module here is an edge-emitting laser diode (LD), a vertical cavity surface-emitting laser diode (VCSEL), or a photon up-conversion laser including second-harmonic generation (SHG). The optical output is usually provided out of an optical component such as a pigtail fibre, a fibre with a connector, a waveguide, a light guide, or a lens unit for the convenience of users. In advanced display applications, not only visible laser diodes but also near infrared (near IR) laser diodes are included in the module for sensor applications such as the LiDAR system (light detection and ranging, or laser image detection and ranging). Therefore, the wavelength range for display applications covers all the visible wavelengths from 380 nm to 780 nm, including the laser diodes for pumping phosphors. That is, a violet laser diode emitting at 405 nm is included. Photometric and colorimetric measurements ar

Scope: This part of IEC 62595 specifies the electro-optical measuring methods of laser modules with multiple laser devices and an optical output for various displays and display lighting applications which require photometric and colorimetric measurements, covering the wavelength range of 380 nm to 780 nm. The module has multiple laser devices such as edge- emitting laser diodes (LDs), vertical cavity surface-emitting laser diodes (VCSELs), or photon up-conversion laser devices including second-harmonic generation (SHG). The module has an optical output such as an optical fibre, waveguide, light guide, lens unit, or other optics, emitting a laser beam combining the output of the multiple laser devices. NOTE See 3.1.1 for a definition of a laser device inside the laser module.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62595-2-4-2020 PDF

IEC 62595-2-4-2020 PDF

$239.59 $479.18