Mechanical structures for electrical and electronic equipment – Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series – Part 5: Cooling performance evaluation for indoor cabinets
Introduction: Indoor cabinets containing electronic equipment in subrack(s) and/ or chassis provide cooling by several different means, depending on the heat load of the equipment in the cabinet. In most cases air convection is used for cooling. The cabinets can be sealed or non-sealed, and may be equipped with fans for forced air cooling or rely on natural convention cooling without fans. In addition the subrack(s) or chassis may contain their own fans or rely on natural convention. Air convection systems are used to cool low to medium heat load applications. Indoor cabinets containing subrack(s) and/ or chassis assembled with high heat load electronic equipment typically are cooled by air to air heat exchangers or water supplied heat exchangers, and are not considered in this standard. Sealed cabinets are used for systems operated in an industrial atmosphere, to protect the equipment against harsh environments, such as dust or water (IP), or provisions for EMC or acoustic noise. Non-sealed cabinets are used in offices, laboratories or data centres, where the environment is controlled. The cooling performance of an electronic cabinet depends on the type of the cabinet, either sealed or non-sealed, with or without air moving devices, ventilated or re-circulated, and also, on the heat loads and the additional cooling systems (if any) of the equipment inside the cabinet. Therefore, it is difficult to determine properly the cooling capabilities of empty electronic cabinets for various applica
Scope: This part of IEC 62610 specifies a method for evaluating the cooling capacity mainly for air convection cooling of empty cabinets in accordance with IEC 60297 and IEC 60917 series.
Contents:
- FOREWORD
- INTRODUCTION
- Scope