Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements
Introduction: This part of IEC 62613 has been primarily written to address the needs of IEC/IEEE 80005-1 in terms of plugs, socket-outlets, ship connectors and ship inlets (hereafter referred to as "accessories"), to deliver electrical power to ships in ports. The purpose of IEC/IEEE 80005-1 is to define requirements that allow compliant ships to connect to compliant high-voltage shore power supplies through a compatible shore-to-ship connection. These ships are described in IEC/IEEE 80005-1. Ships that do not require connecting with standardized high-voltage shore power supplies as above may use accessories that are not covered by the standard sheets of IEC 62613-2, but they may find it impossible to connect to these shore supplies. Low-voltage plugs, socket-outlets, ship connectors and ship inlets used for the connection of certain ship types to low-voltage shore power supplies can be found in IEC 60309 (all parts).
Scope: This part of IEC 62613 applies to accessories with three phases and earth with pilot contacts, one pole for neutral. These accessories have rated currents not exceeding 500 A and rated operating voltages not exceeding 12 kV 50/60 Hz. NOTE 1 In some countries, the term "ground" is used instead of "earth". These accessories are primarily intended for use outdoors, in a seawater environment, for the shore supply of ships (ship-to-shore connection), in an ambient temperature within the range of −25 °C to +45 °C. NOTE 2 In some countries, other ambient temperatures prevail and are considered. These accessories are not intended for use in hazardous areas. In such locations where special conditions prevail, additional requirements can be necessary. These accessories are intended to be connected to cables of copper or copper alloy only. Socket-outlets or ship inlets incorporated in or fixed to electrical equipment are within the scope of this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope