Photovoltaic concentrators (CPV) – Performance testing – Part 2: Energy measurement
Introduction: IEC 62670 series establishes requirements for evaluating concentrator PV performance. It is written to be applicable to all concentrator PV technologies that have a geometric concentration ratio greater than 3× and require tracking. Included in the IEC 62670 series of standards are definitions of the standard conditions and methods to be used for assessing CPV performance. IEC 62670-1 defines a standard set of conditions so that power ratings noted on data sheets and nameplates have a standard basis. IEC 62670-2 describes an on-sun, measurement based method for determining the energy output and performance ratio for CPV arrays, assemblies and power plants. IEC 62670-3 (under consideration) describes methods for providing a CPV power assessment under a set of standard conditions, enabling assessments both indoors and outdoors. IEC 62670-4 (under consideration) describes methods for calculating the prospective electrical energy output of CPV modules, arrays, assemblies and power plants based on the measurements carried out in IEC 62670-2.
Scope: This part of IEC 62670 specifies the minimum requirements for determining the energy output and performance ratio for CPV modules, arrays, assemblies and power plants using an on- sun, measurement based method. The purpose of this International Standard is to define testing methods, to establish a standard energy measurement for CPV modules, arrays, assemblies and power plants, and to specify the minimum reporting information.
Contents:
- FOREWORD
- INTRODUCTION
- Scope