Luminaire performance – Part 2-1: Particular requirements – LED luminaires (Commented Version)
Introduction: This standard is the conversion of IEC PAS 62722-2-1 into a full IEC performance standard for LED luminaires for general lighting applications. This document acknowledges the need for relevant tests for luminaires using this new source of LED as an electrical light source 1. This document is seen in close context with the publication of simultaneously developed performance standards for luminaires in general and for LED modules. This document does not consider luminaires designed for LED lamps, which are covered in IEC 62722-1. Changes in LED luminaires standards have an impact on LED module standards and vice versa, due to the behaviour of LED. Therefore, for the development of this document, the mutual consultancy of experts of both products has taken place. The provisions in this document represent the technical knowledge of experts from the fields of the semiconductor (LED chip) industry and of the traditional electrical light sources and luminaires. As this document has been simultaneously developed and edited with the standard for LED modules (IEC 62717), where appropriate, the compliance of the LED modules with the provisions of IEC 62717 can be transferred to the whole luminaire.
Scope: This part of IEC 62722 specifies the performance requirements for LED luminaires, together with the test methods and conditions, required to show compliance with this standard. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. For some types of luminaires (e.g. decorative or household) the provision of performance data under the scope of this document is not appropriate. 2 In this document, the following types of LED luminaires are distinguished. Type A – Luminaires using LED modules where compliance with IEC 627171 has been proven is given. Type B – Luminaires using LED modules where compliance with IEC 627171 has not been proven is not given. Type C – Luminaires using a LED lamp and covered in IEC 62722-1. Luminaires using an LED lamp are covered in IEC 62722-1 and are not within the scope of this document. 3 The requirements of this document only relate to type testing. This standard does not cover Type C luminaires. This standard does not cover LED luminaires that intentionally produce coloured light, neither does it cover luminaires using OLEDs (organic LEDs). These performance requirements are additional to the requirements in IEC 62722-1, Clauses 1 to 9, except where in this Part 2-1 alternative methods of measurement or limits are specified. 4 As this standard has been simultaneously developed and edited with the standard for LED modules, where appropriate the compliance of the LED modules to the provisions of IEC 62717 may be transferred to the whole luminaire. This document covers LED luminaires using LED modules, based on inorganic LED technology that produces white light. It does not cover luminaires using light sources based on OLED technology (organic LED technology). 5 The lifetime of LED luminaires is in most cases much longer than the practical test times. Consequently, the verification of manufacturer’s lifetime claims cannot be made in a sufficiently confident way. For that reason the acceptance or rejection of a manufacturer’s life time claim, past 25 % of rated life (with a maximum of 6 000 h), 6 is out of the scope of this document. ___________ 1 To be published. –
Contents:
- FOREWORD
- INTRODUCTION
- Scope