Safety of machinery - Requirements for cableless control systems of machinery
Introduction: Cableless control systems (CCS) are increasingly being used to provide an operator interface on a wide range of machinery. The functionality of a CCS and the way in which it interfaces with the overall machine control system can therefore affect the safety of the machinery. IEC 62745 specifies requirements for the functionality of a CCS that is interfaced with or is part of a machine control system for use as an operator control station on a machine. The extent to which the functionality of a CCS is relied upon to minimise risk on a machine is a key selection criterion. It is therefore important to select a CCS that provides suitable control functions with an appropriate safety integrity in accordance with the risk assessment at the machine. In some particular applications, the requirements for a CCS can exceed those specified in this document.
Scope: This standard specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator. NOTE The part of the cableless control system that is used as an operator control station is sometimes referred to as the ‘transmitter’ and the part that interfaces with the machine control system is sometimes referred to as the ‘receiver’. However, to take account of the possibility of bi-directional communication, this standard refers to these individual parts as the ‘remote station’ and the ‘base station’ respectively. This document does not deal with cableless communication between parts of a machine(s) that are not operator control stations. This document is not intended to specify all of the requirements that are necessary for the design and construction of a cableless control system. For example, it does not specify communication protocols, frequency or bandwidth aspects, nor the full range of constructional requirements such as impact resistance, ingress protection, electromagnetic compatibility, etc. The provisions of this document are intended to be applied in addition to the requirements for electrical equipment in the IEC 60204-1. This document is a type-B2 standard as stated in ISO 12100.
Contents:
- FOREWORD
- INTRODUCTION
- Scope