Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors
Introduction: a) Technical background, main issues, and organisation of the standard With the majority of NPPs over 30 years old, the management of ageing of temperature sensors is currently a relevant topic, especially for those plants that have extended their operating licenses or are considering this option. This standard is intended to be used by operators of NPPs (utilities), systems evaluators, vendors, and by licensors. In the international temperature measurement, the scale of temperature has been updated with ITS- 90 since it was published in 1990, so it is necessary that ITS-90 should be addressed in the standard to cover the calibration of measuring and test equipment for temperature sensors. b) Situation of the current standard in the structure of the IEC SC 45A standard series IEC 62765 is the third level IEC SC 45A document comprised of several parts to tackle the specific issue of management of ageing of sensors and transmitters in nuclear power plants (NPPs) for I&C systems important to safety. Part 2 of IEC 62675 is dedicated to temperature sensors. IEC 62342 is the second level standard of SC 45A covering the domain of the management of ageing of nuclear instrumentation systems used in NPPs to perform functions important to safety. IEC 62342 is the introduction to a series of standards to be developed by IEC SC 45A covering the management of the ageing of specific I&C systems or components such as electrical cabling systems (IEC 62465), and sensors and transmitters (IEC 6
Scope: This part of IEC 62765 identifies minimum requirements and applicable practices for correcting and preventing any potential impacts on nuclear power plant (NPP) safety due to the ageing of temperature sensors, such as NPP resistance temperature detectors (RTDs) and thermocouples (TCs). This document provides strategies, technical requirements, and recommended practices for the management of the ageing of temperature sensors important to safety in nuclear power plants (NPPs) to ensure that ageing can be identified and that suitable remedial actions are undertaken as necessary to demonstrate that the safety of the plant will not be impaired. This document is aligned with IEC 62342, which provides guidance on ageing management for instrumentation and control (I&C) systems important to safety in NPPs. IEC 62765 standard series covers pressure transmitters (Part 1) and temperature sensors (Part 2). Part 1 covers pressure transmitter (PT), level transmitter (LT) and flow transmitter (FT). Part 2 consists of resistance temperature detector (RTD) and thermocouple (TC) with respect to instrumentation and control (I&C) important to safety. Detector of neutron power (Part 3) will be covered in a separate standard. Interfaces of temperature sensors with processes such as thermowells, seals, sheathes, extension/compensating cables, and connectors are within the scope of this document. Ageing management of temperature sensors used as M&TEs are beyond the scope of this document. Temperature units of this document are in terms of International Temperature Scale-1990 (ITS- 90), because of consistency with normative references. IAEA SSR-2/1 and SSR-2/2 address the requirements of ageing management in the design, as well as in the operation of the lifetime of the plant.SSG-39 recommends design consideration for ageing management specific to I&C system. The requirements of temperature sensors for industrial and nuclear application in the
Contents:
- FOREWORD
- INTRODUCTION
- Scope