Measurement method of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulator in high-frequency radio on fibre (RoF) systems
Introduction: A variety of microwave/millimeter-wave-photonic devices are useful for wireless communication and broadcasting systems. An optical modulator is an interface which converts an electronic signal to an optical signal. In the field of optical fibre communication systems, the IEC 62007 series was published in 1999. Microwave/millimeter-wave RoF systems are comprised mainly of two parts: one is RF to photonic converter (E/O), and the other is photonic to RF converter (O/E). Radio waves are converted into an optical signal at E/O. This signal is transferred through the optical fibre and then the radio waves are regenerated at O/E. A variety of photonic devices that carry microwave and millimeter-wave signals as subcarrier frequencies are used for high-frequency RoF systems. In particular, the Mach-Zehnder optical modulator (MZM) plays an important role to convert electronic (high-frequency above millimeter-wave) signal to optical signal. In high-frequency RoF systems, specifications of drive voltages, chirp characteristics, inter-modulation distortion of the modulators have been the important technical parameters. This document is prepared to provide the measurement method of MZMs to the industry for evaluating electro-optic material of the modulators to be used in high-frequency RoF systems. This document defines the measurement methods of a half-wavelength voltage and a chirp parameter, which have a significant impact on the performance of RoF systems. Additionally, these methods
Scope: This document specifies measurement methods of a half-wavelength voltage and a chirp parameter applicable to MZMs in microwave and millimeter-wave RoF systems. In addition, these methods are also effective for the estimation of the intermodulation distortions and transmission performances. The methods apply for the following: frequency range: 5 GHz to 110 GHz; wavelength band: 0,8 µm to 2,0 µm; electro-optic material based MZMs and their modules.
Contents:
- FOREWORD
- INTRODUCTION
- Scope