IEC 62841-4-9-2026 PDF

IEC 62841-4-9-2026 PDF

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for battery-powered chain saws for tree service

$239.59 $479.18 -50%
Product Code: IEC 62841-4-9
Stock In Stock
Edition: 1.0
Published: 01/2026
Number of Pages: 152
File Size: 1 file, 5.6 MB

Available Options

Product Description

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for battery-powered chain saws for tree service

Scope: Replacement: This part of IEC 62841 applies to rechargeable battery-powered motor-operated chain saws for tree service, hereinafter referred to as chain saws or machines, having a maximum mass of 5,0 kg. The mass includes the heaviest detachable battery pack(s), if any, as described in IEC 62841-1:2014, K.8.14.2 e) 2), but excludes the guide bar, saw chain and saw chain lubricant. Chain saws covered by this document are intended to be used for pruning and dismantling standing tree crowns. The chain saws covered by this document are designed only to be operated with the right hand on the rear handle and the left hand on the front handle. This document does not apply to chain saws supplied by mains power or power from non-isolated sources that permit the machine to be used while connected to such power supplies; or chain saws supplied by integral batteries; or chain saws for cutting wood as covered by IEC 62841-4-1; or chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine; or pole-mounted pruners; or NOTE 1 Pole-mounted pruners are covered by IEC 62841-4-10. pruning saws. NOTE 2 Pruning saws will be covered by a future part of IEC 62841-4. The maximum rated voltage for machines and battery packs is 75 V d.c. Battery machines covered by this document are not considered to be class I tools, class II tools or class III tools and therefore are not required to have basic insulation, supplementary insulation or reinforced insulation. Electric shock hazard is considered to exist only between parts of opposite polarity. This document deals with the hazards presented by machines which are encountered by all persons in the normal use and reasonably foreseeable misuse of the machines. When evaluating a rechargeable battery pack for protection against electric shock during charging, creepage distances, clearances and distances through insulation, the relevant requirements of this document are applicable with the battery pack fitted to the intended charger. Since rechargeable battery packs for machines are submitted to different use patterns (such as rough use, high

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62841-4-9-2026 PDF

IEC 62841-4-9-2026 PDF

$239.59 $479.18