Alarm and electronic security systems – Social alarm systems – Part 2: Trigger devices
Introduction: This standard is part of the IEC 62851 series of International Standards and Technical Specifications “Alarm and electronic security systems – Social alarms systems“, written to include the following parts: Part 1: System requirements Part 2: Trigger devices Part 3: Local unit and controller Part 5: Interconnections and communications Part 7: Application guidelines (under consideration) A social alarm system provides 24 hours facilities for alarm triggering, identification, signal transmission, alarm reception, logging and 2-way speech communication, to provide reassurance and assistance for people living at home or at places under surveillance and considered to be at risk. A social alarm system is comprised of a number of system parts which can be configured in different ways to provide this functionality. A user can request assistance by the use of a manually activated trigger device resulting in an alarm triggering signal. In certain cases, alarm triggering signals can be generated by automatic trigger devices. A local unit or controller receives the alarm triggering signal, switching from the normal to the alarm condition and indicating this to the user (some systems use an optional pre-alarm condition that allows the user to reset the alarm for a short period of time). The controller normally transmits the alarm condition to an Alarm Receiving Centre (ARC) via the alarm transmission system. The ARC can either be local to the controller or remote from the controller. The
Scope: This part of IEC 62851 specifies the requirements and tests for manually-activated trigger devices forming part of a social alarm system. This International Standard only applies to manually-activated trigger devices that transmit the alarm triggering signal to a local unit or controller via cable or wire-free radio transmission, i.e. a) push button fixed; b) pull switch fixed; c) push button portable; d) pull switch portable. This standard also gives guidance on automatically-activated trigger devices. For the requirements and tests applicable to such trigger devices, references are made to appropriate ISO/IEC standards for fire alarm, gas alarm and intruder alarm system components. This standard does not specify EMC emission or electrical safety requirements. These are covered by other standards.
Contents:
- FOREWORD
- INTRODUCTION
- Scope