IEC 62888-2-2018 PDF

IEC 62888-2-2018 PDF

Railway applications - Energy measurement on board trains - Part 2: Energy measurement

$255.36 $510.71 -50%
Product Code: IEC 62888-2
Stock In Stock
Edition: 1.0
Published: 01/2018
Number of Pages: 200
File Size: 1 file, 2 Bytes

Available Options

Product Description

Railway applications - Energy measurement on board trains - Part 2: Energy measurement

Introduction: Three levels are introduced for categorizing EMS as described in IEC 62888-1:2018, 4.1. This is Part 2 of the IEC 62888 series, which consists of the following parts, under the common title Railway applications – Energy measurement on board trains: Part 1: General Part 2: Energy measurement Part 3: Data handling Part 4: Communication Part 5: Conformance test Part 6: Requirements for purposes other than billing This series of International Standards follows the functional guidelines description in Annex A, “Principles of conformity assessment”, of ISO/IEC 17000:2004 tailored to the Energy Measurement System (EMS). The Energy Measurement System (EMS) provides measurement and data suitable for applications such as energy management, energy saving, billing and others. This series of International Standards uses the functional approach to describe the EMS. These functions are implemented in one or more physical devices. The user of this series of standards is free to choose the physical implementation arrangements. Structure and main contents of the IEC 62888 series This series of International Standards is divided into six parts. The titles and brief descriptions of each part are given below: IEC 62888-1 – General The scope of IEC 62888-1 is the Energy Measurement System (EMS). IEC 62888-1 provides system level requirements for the complete EMS and common requirements for all devices implementing one or more functions of the EMS. IEC 62888-2 – Energy measurement The scope of IEC

Scope: This part of IEC 62888 specifies the requirements applicable to the Energy Measurement Function (EMF) of an Energy Measurement System (EMS) for use on board traction units for measurement of energy supplied directly from/to the Contact Line system. This document also gives requirements for the Current Measurement Function (e.g. current sensor), the Voltage Measurement Function (e.g. voltage sensor) and the Energy Calculation Function (e.g. energy meter). The conformance test arrangements for the Voltage Measurement Function, Current Measurement Function, the Energy Calculation Function and a complete Energy Measurement Function are also specified in this document. This document has been developed taking into account that in some applications the EMF may be subjected to metrological assessment. All relevant metrological aspects are covered in this part and they are applicable to EMS Level 1. Specific requirements for EMS Level 2 and Level 3 are specified in IEC 62888-6. Figure 2 shows the flow between the functional blocks of the EMF. Only connections between the functional blocks required by this document are displayed. – 12 – IEC 62888-2:2018  IEC 2018 Figure 2 – EMF functional block diagram

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62888-2-2018 PDF

IEC 62888-2-2018 PDF

$255.36 $510.71