Railway applications - Energy measurement on board trains - Part 6: Requirements for purposes other than billing
Introduction: Three levels are introduced for categorizing EMS as described in Clause 1. This is Part 6 of the IEC 62888 series which consists of the following parts, under the general title Railway applications – Energy measurement on board trains: Part 1: General Part 2: Energy measurement Part 3: Data handling Part 4: Communication Part 5: Conformance test Part 6: Requirements for purposes other than billing This series of International Standards follows the functional guidelines description in Annex A, “Principles of conformity assessment”, of ISO/IEC 17000:2004 tailored to the Energy Measurement System (EMS). The Energy Measurement System (EMS) provides measurement and data suitable for applications such as energy management, energy saving, billing and others. This series of International Standards uses the functional approach to describe the EMS. These functions are implemented in one or more physical devices. The user of this series of standards is free to choose the physical implementation arrangements. Structure and main contents of the IEC 62888 series This series of International Standards is divided into six parts. The titles and brief descriptions of each part are given below: IEC 62888-1 – General The scope of IEC 62888-1 is the Energy Measurement System (EMS). IEC 62888-1 provides system level requirements for the complete EMS and common requirements for all devices implementing one or more functions of the EMS. IEC 62888-2 – Energy measurement The scope of IEC 62888-2 is th
Scope: This part of IEC 62888 specifies the specific requirements for EMS to be used for benchmarking, daily energy consumption monitoring, technical research and development. This document provides the requirements for monitoring consumed energy on board in daily services in an easy way and the measured data are applicable for general purposes in industry such as energy management, energy saving, etc. However, this document is not applicable for billing purposes. The practical purposes in industrial fields are, e.g.: a) monitoring daily energy consumption of vehicles; b) obtaining data on influential factors, such as operational commands and surrounding conditions, in order to analyse relations between operations and energy; c) energy management of power flow between vehicles and fixed installations; d) implementing investigation tests of research and development for vehicle systems; e) energy cost forecasting for analysing overall efficiency and consumption. The requirements specified in this document supplement and/or amend the requirements specified in IEC 62888-1 to IEC 62888-5. The energy measurement system (EMS) is categorized in 3 Levels as described in IEC 62888-1:2018, Table 1. This document applies to Level 2 and Level 3. In this document unless levels are specially mentioned, both Level 2 and Level 3 apply. If a requirement applies only to one level between Level 2 and Level 3, this condition is clearly specified. In the following clauses and subclauses square brackets, e.g. [IEC 62888-3:2018, 4.6.1] in the title indicate relevant clauses and subclauses of other parts. When lower subclauses of other parts are not listed, provisions of higher subclauses apply to the lower subclauses. IEC 62888-6:2019 © IEC 2019 – 11 – Table 1 – Levels of performance [IEC 62888-1:2018, Table 1] Levels Description Notes Level 1 Level for measuring energy consumption on board for applications like energy management, energy saving, billing and others. This is the only level applicable for billing Level 2 Level for measuring energy consumption on board for applications like energy management, energy saving, benchmarking by suppliers or train operators and others. This level is no
Contents:
- FOREWORD
- INTRODUCTION
- Scope