IEC 62899-202-7-2021 PDF

IEC 62899-202-7-2021 PDF

Printed electronics-Part 202-7: Materials-Printed film-Measurement of peel strength for printed layer on flexible substrate by the 90° peel method

$50.44 $100.88 -50%
Product Code: IEC 62899-202-7
Stock In Stock
Edition: 1.0
Published: 03/2021
Number of Pages: 16
File Size: 1 file, 995 Bytes

Available Options

Product Description

Printed electronics – Part 202-7: Materials – Printed film – Measurement of peel strength for printed layer on flexible substrate by the 90° peel method

Introduction: A printed layer on a flexible substrate is widely employed as an electrode or interconnection for flexible devices. An integral component of this conductive body of the devices is conductive composite material and is commercialized as conductive ink. A simple tape test method has been widely used for qualitative adhesion measurement, but it cannot be used to measure strong adhesion between the printed layer and the flexible substrate. A conventional peel test method is widely used in the printed circuits industry to evaluate the adhesion between a thin printed layer with dense microstructure and the flexible substrate. Peel strength value can be measured after an additional metal electroplating process on a thin printed layer to increase the printed layer thickness to provide a stable grip in an adhesion testing machine. However, it is not suitable for testing a printed layer which has a porous structure susceptible to contamination of the interface between the printed layer and flexible substrate during the electroplating process. Therefore, a quantitative and reliable adhesion test method is used to measure and understand interfacial adhesion of the printed layer to the flexible substrate and its long-term reliability. In this document, a new standard test method to measure the peel strength of a printed layer on a flexible substrate is proposed. This method calls for peeling the flexible substrate instead of an additional metal electroplating on the printed layer. It is us

Scope: This part of IEC 62899 provides a test method to measure the peel strength of a printed layer on a flexible substrate. This method calls for peeling the flexible substrate instead of an additional metal electroplating on the printed layer. The method described in this document can be used to compare the peel strengths of the printed layers on the same flexible substrate and thickness conditions. It can be used when the adhesion between the printed layer and flexible substrate is weaker than any other interface between the printed layer and the adhesive, the adhesive and the panel.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62899-202-7-2021 PDF

IEC 62899-202-7-2021 PDF

$50.44 $100.88