Printed Electronics – Part 301-3: Equipment – Contact printing – Rigid master – Method to measure the shape errors of printing plate rollers
Introduction: The term "printed electronics" can be easily understood in that this industry involves electronic devices and products that are manufactured by using state-of-the-art printing techniques, otherwise known as additive processes. Printing methods have been widely used in textile and paper type substrates for centuries. In the past, the advent of mass producible printouts had a significant impact on how knowledge is stored, transferred and reproduced. At this current stage of technological development, printing on either rigid or flexible substrates is considered to supplement or replace traditional electronic device manufacturing processes. The difference between media printing and printed electronics stems from the fact that media print is used to convey information for humans to process using their eyes while printed electronics requires machines to process electronic information; the level of resolution and functionality required makes the difference. Some of the widely used functional materials for printed electronics are, but not limited to, nano- or micro-size metal particles, semiconductive polymers, and dielectric materials. Due to the available and required readout resolution, small feature sizes below 20 µm will necessarily be printed. Layer thickness and registration accuracy of printed products are closely related to the quality control of electronic devices with ink materials requiring a high level of quality. Overall, printing tolerance is much smaller in printed e
Scope: This part of IEC 62899 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error. This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.
Contents:
- FOREWORD
- INTRODUCTION
- Scope