IEC 62899-302-4-2024 PDF

IEC 62899-302-4-2024 PDF

Printed electronics-Part 302-4: Equipment-Inkjet-Medium for inkjet printing dot placement evaluation

$50.44 $100.88 -50%
Product Code: IEC 62899-302-4
Stock In Stock
Edition: 1.0
Published: 08/2024
Number of Pages: 18
File Size: 1 file, 710 Bytes

Available Options

Product Description

Printed electronics – Part 302-4: Equipment – Inkjet – Medium for inkjet printing dot placement evaluation

Introduction: Until recently, inkjet technologies were used only for imaging printing (conventional “graphic printing”). However, recent developments of inkjet technologies, such as technologies for inkjet print-head, functional ink or print-head driving technologies, make it possible to extend their applications to printed electronics. For these applications, the accuracy requirement for inkjet drop placement tends to be higher than in graphic printing. This document considers that “'inkjet print dot placement accuracy” is the key parameter to obtain an appropriate output that has adequate print quality. In order to evaluate the inkjet printing system, inkjet print dot placement accuracy is measured. For that purpose, an appropriate medium is used, since the “accuracy” of the printed position is only secured by using an appropriate medium that shows actual dot placement. This document describes what kinds of parameters of an appropriate medium are useful to obtain actual accuracy of dot placement evaluation for printed electronics.

Scope: This part of IEC 62899 provides measurement methods and specifications for a medium to measure actual inkjet dot placement for printed electronics applications. NOTE For this document, a medium is a substrate with (a) certain functional layer(s) to facilitate the ink pinning process (or step). These functional layers are either (a) a liquid absorbing layer or (b) a hydrophilic or hydrophobic layer as shown in Figure 1. a) Medium with a liquid absorbing layer b) Medium with a hydrophilic or hydrophobic layer NOTE These figures are examples, and do not show all the required layers of a medium. Figure 1 – Examples of a medium for actual dot placement

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62899-302-4-2024 PDF

IEC 62899-302-4-2024 PDF

$50.44 $100.88