Printed electronics – Part 402-1: Printability – Measurement of qualities – Line pattern widths
Introduction: This document contains fundamental information on the measurement of line pattern width in printed electronics. The line pattern width includes not only width of line pattern but also space between line patterns. This document includes measurement procedures as well as definitions of width and space of line pattern considering their non-uniform properties, which are quite different from those in graphic art printing or the etching process. For example, in graphic art printing, the dimension of pattern is generally more than several millimetres and its variation is relatively small and negligible. However, in printed electronics, the printed line patterns, through printing processes such as inkjet, gravure, flexography, etc., can have very narrow width of under several tens of micrometres. Moreover, the variation of line pattern width can be relatively large due to rough edges, which is hardly observed in the etching process. Therefore, it is difficult to define the width of line pattern exactly. The space between patterns has the same issues to those of line pattern width. The accurate information about line pattern width can be very important for control and management of printability in the printing process. Moreover, the dimension of line pattern width as well as variations can strongly affect the reliability and performance of printed electronics devices made of several sets of patterns. This document excludes the standardization of the measurement system. It specifies th
Scope: This part of IEC 62899 specifies the measurement methods of the width of line pattern and spaces between the line patterns in printed electronics. These printed line patterns are treated as two-dimensional on a substrate. When the patterns are definitely affected by three- dimensional configurations, these are specified in measurement methods for vertical variance in printed electronics.
Contents:
- FOREWORD
- INTRODUCTION
- Scope